Oil And Water Don’t Mix, But Oil And Air Sure Do

Do you have oil in your compressed air system? It may be there on purpose…air operated tools require it, and there are a number of devices on the market that provide a precise amount of oil to keep the moving parts in these tools well lubricated and properly operating.

If it’s not there on purpose, it’s not necessarily a problem, though, and it’s hardly uncommon. Many air compressors are oil lubricated, which means there’s oil being pumped at a constant rate, directly towards the piston rings, and a little bit is always going to end up in the air. As the rings wear, even more makes it past…this is impossible to prevent, but, with proper maintenance, it’s kept to a very minimal amount. There are, of course, oil-less compressor designs, which can eliminate this entirely, but they’ve been known to carry a little heavier price tag. Some situations, though, make them worth every penny.

Trace amounts of oil like this don’t affect a lot of compressed air applications, including the performance of most of our products. There are times, however, when oil needs to be addressed…for instance:

*Blow off prior to painting or coating. Even trace amounts of oil on a surface to be painted can cause big problems.
*Electrical enclosure cooling. Oil won’t affect the heat removal performance of an EXAIR Cabinet Cooler System, but it can indeed cause serious issues with electrical/electronic components and devices if it’s present in the cold air that’s blowing on them.
*Air operated conveyors. Likewise, oil won’t hurt the performance of a Line Vac, but keep in mind that anything in the air supply will get on the material or product you’re conveying.
*Static Eliminators. Here’s a situation where oil in the air WILL have an effect on product performance…the emitter points of your EXAIR Static Eliminator need to be kept clean (including oil free) for proper operation. And, again, anything in your air is going to get onto your product.

This is where proper filtration comes in: properly installed downstream of a Filter Separator, EXAIR’s coalescing Oil Removal Filters take out even trace amounts of oil from the air flow, ensuring your process doesn’t see anything but clean, dry air.

EXAIR Model 9027 Oil Removal Filter, installed between Model 9004 Filter Separator and 9008 Pressure Regulator, using our Modular Coupling Kits

EXAIR Model 9027 Oil Removal Filter, installed between Model 9004 Automatic Drain Filter Separator and 9008 Pressure Regulator, using our Modular Coupling Kits.

Again, oil in your air isn’t always a problem. If you have questions about your application, though, give us a call…if it IS a problem, we’ve got a solution.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: