EXAIR Super Air Wipe Helps Welding Process

Published on by Leave a comment

Several years prior we had a customer that was using a block-type Air Wipe from a competitor to remove water from an extrusion.  These air wipes were built using materials similar to UHMW and the 2 halves were hinged with air holes drilled into it.  They were using these block air wipes on several lines and decided to try an EXAIR Super Air Wipe after contacting our Application Engineers. The interesting point was that it required 5 block type air wipes to equal the efficiency of 1 EXAIR Super Air Wipe.

Since one EXAIR Super Air Wipe equaled the performance of 5 of the competitor’s products it consumed less air, was less expensive and produced less noise.  Also in space sensitive applications the EXAIR Super Air Wipe is much thinner than the block type.  To highlight this the Super Air Wipe is 1.13″ thick on all 11 models that range from 3/8″ to 11″ throat diameter.

Another clear advantage is performance. The block air wipe performance can only be changed by altering the inlet air pressure while the EXAIR Super Air Wipe can also be changed by adjusting the inlet air pressure or changing the air gap of the Air Wipe. Simply by changing out an internal shim, the air gap will allow more or less volume of compressed air at a given pressure. By changing shims and adjusting pressure, EXAIR Super Air Wipes provide the flexibility which leads to a successful application across industry.

EXAIR’s Super Air Wipes are engineered to use compressed air efficiently and maximize force upon the target.

sawworksani

Compressed air flows through an inlet (1) of the Air Wipe into an annular chamber (2). It is then throttled through a small ring nozzle (3) at high velocity. This primary airstream adheres to the Coanda profile (4), which directs it down the angled surface of the Air Wipe. A low pressure area is created at the center (5) inducing a high volume flow of surrounding air into the primary airstream. As the airflow leaves the Air Wipe, it creates a conical 360° ring of air that attaches itself to the surface of the material running through it (6), uniformly wiping the entire surface with the high velocity airflow.

If you are interested in discussing EXAIR’s Super Air Wipes, I would enjoy hearing from you.

Steve Harrison
Application Engineer

Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook

Advantages of Thermal Mass or Thermal Dispersion Flow Measurement

Published on by Leave a comment

EXAIR’s Digital Flow Meter offers an easy way to measure, monitor and record compressed air consumption. The Digital display shows the current amount of compressed air flow, allowing for tracking to identify costly leaks and/or inefficient air users.

dfm

How exactly does the Digital Flow Meter work?  The unit falls under the category of Thermal Mass or Thermal Dispersion type flow meters.  Below shows the backside of a unit.

IMG_7387

Thermal mass flow meters have the advantage of using a simple method of measuring flow without causing a significant pressure drop. The EXAIR units have (2) probes that are inserted through the pipe wall and into the air flow.  Each of the probes has a resistance temperature detector (RTD.) One of the probes measures the temperature of the air flow.  The other probe is heated to maintain a preset temperature difference from the temperature measured by the first probe.  The faster the air flow, the more heat that is required to keep the second probe at the prescribed temperature.  From Heat Transfer principles, the heat energy input required to maintain the preset temperature is based on the mass velocity of the air.  Using basic physical properties for compressed air, the volumetric rate can be determined (SCFM), and displayed.

It is important to note that the compressed air should be filtered to remove oils, and dried to remove water, as these liquids have different physical properties from air, and will cause erroneous readings.

Advantages

  • Easy to install – No cutting or welding required
  • Summing Remote Display and Data Logger available
  • Sensitive at low flows
  • Rugged, reliable and no moving parts
  • No calibration or set-up required
  • Models from 1/2″ to 4″ schedule 40 iron pipe in stock
  • Short lead time for sizes up to 6″ Schedule 40 iron pipe
  • Available for size 3/4″ to 4″ copper pipe
  • New Wireless Capability

If you have any questions about the Digital Flow Meter or any of the EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Flat Super Air Nozzle: Build Your Own System Overview

Published on by John BallLeave a comment
Flat Nozzle Blow-off Kit

EXAIR manufactures a variety of nozzles that are OSHA safe, high quality, and very efficient.  In this blog, I would like to discuss the features and benefits of the EXAIR Flat Super Air Nozzles and how to build a system to fit your application.

The EXAIR Flat Super Air Nozzles are manufactured to blow a wide forceful stream of air.  Their patented design creates a high velocity, laminar air stream with minimal air consumption and low noise.  They come in two sizes; 1” (25mm) and 2” (51mm), and EXAIR stocks them in two different materials, zinc-aluminum alloy and 316 stainless steel.  With a metal construction, breakage is not a concern and performance is not sacrificed even in the harshest of environments.  I have seen many plastic flat nozzles that were broken in applications.  The noise level was loud, and compressed air was wasted.  The unique patented shims inside the EXAIR Flat Super Air Nozzles give three improvements to the design and function.   First, they come in different thicknesses to create a wide range of forces.  In conjunction with a regulator, you can “dial” in the correct amount of force from a breeze to a hurricane without overusing your air compressor.  The patented design also allows an even force across the entire width of the air nozzle.  Lastly, they help to entrain the free ambient air; so that less compressed air is required.  The high efficiency design will save you money.  The EXAIR Flat Super Air Nozzles are effective in uniform blowing; efficient; and superior in quality and durability.  You can watch a video blog on the importance of using our patented shim.

(Click on photo to go to blog)

To show the different types and styles of Flat Super Air Nozzles that EXAIR stocks, you can correspond to the model number make-up sheet below.

To give force adjustments to the individual Flat Super Air Nozzles, EXAIR offers a way to change the thickness of the shim to better suit your application.  You can increase or decrease the force of the nozzle by just removing two screws and changing the shim inside.  This is a unique feature as most competitive flat nozzles do not allow you to do this.  EXAIR offers different thicknesses of the patented shims in our Shim Sets.  The chart below corresponds the appropriate Shim Set to the Flat Super Air Nozzle.

Flat Super Air Nozzle to Shim Set Chart

What can make the Flat Super Air Nozzles even better?  More flexibility.  The Stay Set Hoses can add that flexibility to the Flat Super Air Nozzles.  They are designed to manually position the Flat Super Air Nozzle to accurately target the air stream.  They allow maneuverability to locate the nozzle at different heights or angles; and once positioned, the Stay Set Hose will hold the nozzle in place.  They come in different lengths from 6” (152mm) to 36” (914mm).  We carry two different styles of connections to adapt to any of the Flat Super Air Nozzles.  You can select the different lengths of Stay Set Hoses (SSH) to the Flat Super Air Nozzle by the model number make-up sheet below.

To build your system even further, EXAIR also can offer a Magnetic Base to your Stay Set Hoses and Flat Super Air Nozzles.  The Magnetic Base has a powerful magnet on the bottom to securely attach the blow-off nozzles vertically or horizontally.  This feature is great if you need to move the nozzles to different areas in your application.  EXAIR manufactures a one-outlet and a two-outlet design.  Each outlet has a ¼ turn valve to manually turn on or off the nozzle and only require one air supply inlet.  To add this product to the Flat Super Air Nozzle with the Stay Set Hose, you can use the model number make-up sheet below.

With the EXAIR Flat Super Air Nozzles, you can take advantage of the durability, safety, and efficiency for your blow-off device.  In addition, you can build a system that will best suit your requirements.  You can add different lengths of Stay Set Hoses and/or different Magnetic Bases.  With these combinations grouped into one model number and in stock for quick shipments, it makes it simple to purchase from EXAIR.  Just to let you know, they also come with a 30-day unconditional guarantee to try them out.  If you need any help in building your optimum blow-off system, you can speak to an Application Engineer at EXAIR.  They will be happy to assist you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Super Air Amplifier Increases Airflow In Vaccum Hood For Fume Extraction

Published on by exaircorpLeave a comment

A couple days ago I  took a call from an extrusion company who was looking to increase the airflow in their plating operation. They manufacture several different shapes and styles of aluminum extrusions by the way of 8 large extrusion presses. On one of the presses they make a specialty line of products that are sent to a finishing operation to be anodized.

Above the anodizing process tanks they use a vacuum hood to capture fumes and send them to a scrubber system so the air can be cleaned before being exhausted. They were starting to see an increase in the level of VOC (Volatile Organic Compound) gases in the area and, after some internal testing, determined the existing system wasn’t moving enough air through the system for the gases to be adequately delivered to the scrubber tank.

Example of a scrubber system

After further discussion, the customer ordered our Model # 120022 2″ Super Air Amplifier to test under our Unconditional 30 Day Guarantee.  Air Amplifiers are one of the most efficient products in the EXAIR catalog. Using a patented internal shim, they use a small amount of compressed air that passes through an internal chamber where it is exhausted through a thin gap at high velocity. This directed airflow creates a lower pressure at the intake side which draws in a large amount of free air. The 2 combining air flows result in a large volume of “amplified”, high velocity exhausting airflow, making them ideal for increased air movement.

Air Amplifiers entrain enormous amounts of “free” air, at ratios of up to 25:1!

If you have an application where you need to increase airflow or if you’re looking to vent or exhaust noxious fumes, an Air Amplifier is the ideal choice. For help selecting the best Model or to discuss a particular process, please contact an application engineer for assistance.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

Pueblo Chemical Agent-Destruction Pilot Plant Agent Processing Building courtesy of PEO ACWA via creative common license.