Air Nozzles and Air Jets: An Overview

One of the simplest solutions to lower your air consumption and noise level when it comes to compressed air is to switch your open tubes or pipes and liquid nozzles which are being used for air applications to an engineered compressed air nozzle. EXAIR’s Engineered Air Nozzles and Jets provide a simple solution for a wide variety blow off and compressed air applications and can solve a multitude of process problems efficiently. These applications can include simple blow offs, cooling, part ejection, and much more.

Super Air Nozzles:
Super Air Nozzles are one of the more versatile of all of EXAIR’s Engineered Air Nozzles. They come in many different sizes from a tiny size of M4 threads and 13 millimeters long to the largest with  1-1/4 NPT threads which has a 2″ hex and is almost 5″ long. These are usually used for standard blow off applications that replace open pipes to reduce your air consumption and noise. The force values vary from 2 ounces to 23 pounds of force. 

Another variation of the Super Air Nozzles is the Flat Super Air Nozzles; these nozzles create a small flat curtain of air at a high force to provide a wider blow off area for smaller NPT sized nozzles. The 1” and 2” Flat Super Air Nozzle also have replaceable shims that allow you to adjust the force coming out of the nozzle by increasing the amount of air that is used.   

EXAIR Air Nozzles

Back Blow Air Nozzles:
Back Blow Air Nozzles are designed in a way that blows that makes it easy to blow out the inside of pipes. The Back Blow Air Nozzles have holes around the outside diameter pointed back that creates a cone of air around the air inlet port. This makes it easy to dislodge clogs in pipes that you don’t want going back into the machine and for blowing out liquid and debris from the inside. They are also commonly used with EXAIR’s Chip Shield as to prevent any particles from flying back and hitting the user. Back Blow Air Nozzles come in three sizes: M4, ¼”, and 1” and can be used on inside diameters ranging from ¼” to 16”. 

EXAIR Back Blow Air Nozzles

Super Air Nozzle Clusters:
Super Air Nozzle Clusters use a number of the ¼” Super Air Nozzles to create one nozzle that has a wider cone and larger force. Clusters are usually used in wide area blow off but can also be used for part cooling and part reject as they do supply a wider area of force. Super Air Nozzle Clusters are sized by the number of nozzles in the cluster; the three sizes that we offer are 4-nozzle cluster (3/8” NPT inlet), 7-nozzle cluster (1/2” NPT inlet), and the 12-nozzle cluster (1” NPT inlet). 

EXAIR Super Air Nozzle Cluster

Air Jets:
Air Jets amplify the total volume of air into a high velocity stream of air. This makes it very useful for blowing off/drying applications and cooling applications due to the higher volume of air flowing through the unit. Air Jets come in two variations which are the High Velocity Air Jet and the Adjustable Air Jets. The High Velocity Air Jet uses a 0.015” shim that allows the air to escape the unit at a high velocity laminar flow to entrain the surrounding ambient air; this can be adjusted down using the shim kit which includes a 0.006” and 0.009” shims. The Adjustable Air Jet allows the user to easily adjust the air gap using the micrometer gap indicator. 

EXAIR Air Jets

If you have any questions about compressed air systems or want more information on any of EXAIR’s products, give us a call, we have a team of Application Engineers ready to answer your questions and recommend a solution for your applications.

Cody Biehle
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Super Blast – High Force Safety Air Guns

For those times when you need a hand-held, long distance, wide area blowoff, cooling or drying tool – look no further than the EXAIR Super Blast Safety Air Guns.  Any of the Super Air Nozzle Clusters and Large Super Air Nozzles that we offer can be had with the added convenience of a comfortable soft grip and easy to operate spring-loaded manual valve that automatically shuts off if dropped.

All Super Blast Safety Air Guns meet OSHA noise level and pressure requirements.

Super Blast 2
The EXAIR family of Super Blast Safety Air Guns

The nozzle material is Zinc Aluminum Alloy, with Stainless Steel available for the models 1214SS and 1215SS. The base Safety Air Guns are 10″ – 15″ long (nozzle type dependent), and a longer extension can be added, in either 3′ or 6′ lengths to gain access to hard to reach areas.

Super Blast Extension
Super Blast Safety Air Gun with 3′ Extension

Super Blast Application
Using a Super Blast Safety Air Gun to remove Floor Debris

The table below provides a guide for performance of each of the Super Blast models, for comparison and to make selection easy.  We can provide more details, including dimensional drawings and air flow patterns as required. And as always, the Super Blast Safety Air Guns are in stock, and come with the EXAIR Unconditional 30 Day Guarantee.

Super Blast Table

If you have any questions about the Super Blast or any of the EXAIR Safety Air Guns, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB

Engineered Air Nozzles and Jets Outperform – Save Air, Increase Safety, Save Money

EXAIR’s Engineered Air Nozzles and Air Jets provide a simple solution to lower compressed air usage and reduce noise levels for compressed air blowoff operations.

Why Air Nozzles and Jets – When compared to commonly used open copper tubes or pipes, compressed air savings can be as high as 80%. And with less compressed air, sound levels are greatly reduced.  A 10 dBA noise level reduction is typical.  All EXAIR Air Nozzles and Jets meet the Occupational Safety and Health Administration (OSHA) maximum dead end pressure and sound level exposure requirements. They also carry the CE mark.

nozzlescascade2016cat29_559
The largest selection of engineered Air Nozzle sizes and materials are only available form EXAIR 

EXAIR Nozzles are engineered to take advantage of the Coanda effect to amplify the airflow up to 25 times or more. Compressed air is ejected through the small orifices and surrounding air is entrained into the main stream. The resulting air stream is a high volume, high velocity blast of air at minimal consumption.  EXAIR manufactures many styles, from the very small, but powerful Atto Super Air Nozzles, to the largest 1-1/4 NPT Super Air Nozzle.  Also offered are 1″ and 2″ wide Flat Super Air Nozzles, and the Back Blow style for cleaning out tubes, pipes, channels or holes from 1/4″ to 16″ in diameter.
EXAIR Air Jets utilize the Coanda effect (wall attachment of a high velocity fluid) to produce air motion in their surroundings.  A small amount of compressed air (1) is throttled through an internal ring nozzle above sonic velocity.  A vacuum is produced, pulling in large volumes of surrounding, or ‘free’ air, through an around the jet (2).  The exit flow is the combination of the two air sources (3).

air-jet
How an Air Jet Works

EXAIR manufactures Air Jets in two types, High Velocity, and Adjustable with materials of construction of brass and Type 303 Stainless Steel.  The High Velocity Air Jet uses a changeable shim to set the gap, controlling the force and flow of the air.  The Adjustable does not use a shim, and has a micrometer gap indicator and locking ring to allow for varying force and flow performance.

AirJetFamily
EXAIR Air Jets – High Velocity type on the left, Adjustable type on the Right

If you have questions about Air Nozzles and Jets, or would like to talk about any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_BB