Air Nozzles and Guns to Clean Inside Tube, Pipe, and Hoses

Back Blow Air Nozzle Family

EXAIR manufactures three different sizes of Back Blow Air Nozzles to clean inside tubing, pipes, hoses, and channels.  The 360o rear airflow pattern can “wipe” the entire internal surface clean from coolant, chips, and debris.  They are constructed of 316SS, making these nozzles robust and durable.

Our smallest Back Blow Nozzle is the Model 1004SS.  It has a M4 X 0.5 male thread and can clean diameters ranging from ¼” (6.3mm) to 1” (25.4mm).  Model 1006SS has a ¼” NPT air connection for cleaning inner diameters ranging from 7/8” (22mm) up to 4” (102mm).  Our largest Back Blow Air Nozzle is the model 1008SS.  It has a 1” NPT connection, and it can be used inside diameters ranging from 2” (51mm) to 16” (406mm).

Now, what can make these unique types of air nozzles even more useful?  Attaching them to an EXAIR Safety Air Gun.  In this blog, I will go through each of our Back Blow Safety Air Guns that EXAIR can offer from stock.

Model: 1604SS-6-CS

VariBlast Compact Back Blow Safety Air Gun:

The unique feature that sets the VariBlast apart from other small air guns is the force variability.  The valve is designed to control the opening to allow for a variable force with the same nozzle.  The VariBlast is made from a durable cast aluminum construction for tough industrial use.  It has a rugged ergonomic grip with a user-friendly trigger.  The compressed air inlets are located in two different positions to select the best fit for your application.

With the model 1004SS Back Blow nozzle, the VariBlast Compact Back Blow Safety Air Gun is a small but powerful tool that can clean inside smaller pipes, tubes, and hoses.  They come standard with extension tubes and a Chip Shield.  The extension tubes range from 6” (152mm) to 36” (914mm) to extend deep inside cavities and openings.  The Chip Shield is made from a durable polycarbonate material that will protect your operators during use.

Model 1204SS-6-CS and 1206SS-6-CS

Soft Grip Back Blow Safety Air Guns:

The next air gun in this series is the Soft Grip Safety Air Gun.  With an ergonomic soft handle and full-grip trigger, the Soft Grip Safety Air Gun can be used for hours without fatigue.  EXAIR offers two types of Back Blow Nozzles with the Soft Grip; model 1004SS and model 1006SS.

As a “bigger cousin” to the VariBlast above, the Soft Grip Back Blow Safety Air Gun with the model 1004SS has extensions ranging from 6” (152mm) to 36” (914mm) as well as a Chip Shield.  The Soft Grip with the model 1006SS Back Blow Nozzle has extensions that range from 6” (152mm) to 72” (1,829mm) in length with a Chip Shield.  Both of these types of Soft Grip Back Blow Safety Air Guns are great products in allowing you to clean inside a greater variety of diameters and lengths.

Heavy Duty Back Blow Safety Air Gun:

For rough industrial environments, EXAIR offers the Heavy Duty Safety Air Guns.  They come with a composite rubber grip and a wide curved trigger.  It has a 3/8” NPT inlet for increased compressed air flow for those “tough” cleanings.

The Heavy Duty Back Blow Safety Air Gun comes standard with the model 1006SS Back Blow Nozzle, an extension pipe, and a Chip Shield.  The extensions lengths can range from 6” (152mm) to 72” (1,829mm).  If you need a tough air gun for rugged areas to clean inside pipes and tubes, the Heavy Duty Back Blow Safety Air Gun could be the best candidate for your application.

Super Blast Back Blow Safety Air Gun:

As our largest model, the Super Blast Back Blow Safety Air Gun has the strongest blowing force.  They can clean large areas inside pipes, channels, and tubes ranging from 2” (51mm) to 16” (406mm) in diameter.  It has a soft foam grip for easy handling and a spring-loaded manual valve that will turn off if dropped.  The model 1008SS Back Blow Nozzle is mounted to an extension that is either 1 foot (0.3m), 3 feet (0.9m), or 6 feet (1.8m) in length.  With a 1” NPT inlet, the Super Blast Back Blow Safety Air Gun will generate a strong blast of air for cleaning and removing troublesome material.

If you need to clean inside tubes, hoses, channels, pipes, etc., EXAIR has the perfect product, the Back Blow Air Nozzles.  They can remove the dirty coolant, chips, and debris in a non-contact way.  EXAIR offers these nozzles with our VariBlast, Soft Grip, Heavy Duty, and Super Blast Safety Air Guns for manual cleaning operations.  EXAIR stocks these Safety Air Guns for fast delivery.  And if you are located in the U.S.A or Canada, we offer a 30-day unconditional guarantee.  You can try them out and see how effective, safe, and powerful they are in improving your internal cleaning processes.  If you need more details, you can contact an Application Engineer at EXAIR.  We will be happy to help you.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Back Blow Air Nozzles Clean Out Pipe, Tubes and Holes

Round SS Tubes

A metal fabricator used a cutting machine to cut different sizes and shapes of stainless steel tubing.  The process was automated and the machine would cut two tubes at a time.  After the cutting operation, the machine would deposit the tubes into a nearby bin.  The operator would then stack the tubes in a wooden container as shown above.  Before the tubes could be transported to another department, the operator would have to clean the inside of each tube.  The current method was to attach a rag to the end of a rod and pushed it inside the tube to remove any coolant and chips that remained from the cutting operation.  Of course, the ability to clean thoroughly with a rag is reduced greatly after a short time of use.  The cleaning process was very time consuming, and when the rag was not changed in a timely manner it did not clean effectively.  The inside of the tubes would get marred from the excess chips that remained on the rag.  This would visually affect the surface finish of the stainless steel.  They emailed me the application detail as they were looking for a non-contact way to clean the inside of the tubes.

The first question from the customer was if we could customize our air nozzles to clean the different diameters and shapes that they were cutting.  EXAIR has made special air nozzles to accommodate unique applications, but I wanted to first make sure that EXAIR did not have a manufactured nozzle in stock to fit this application.  I requested the dimensional information, and the customer sent me the sizes and shapes of the tubes that were ran through their cutting machine.  (Reference Table 1 below).

EXAIR manufactures three different sizes of Back Blow Air Nozzles that are designed to clean inside tubing, pipes, hoses, and channels.  They can range from internal diameters from ¼” (6.3mm) to 16” (406mm).  The 360o rear airflow pattern can “wipe” the entire internal surface clean and can remove coolant, chips, and debris.  In reviewing the dimensions from Table 1 above, I was able to recommend just one Back Blow Air Nozzle for all the tubes; even the square and rectangular ones.  It was model 1006SS Back Blow Air Nozzle.  This 316SS robust designed nozzle can fit inside and clean tubes with internal dimensions ranging from 22mm to 102mm, and it was perfect for all of these tubes.

Soft Grip Safety Air Gun w/ Back Blow Air Nozzle

The customer indicated to me that the tubes were all cut to identical lengths at 550 mm (21.7”).  Being that this was a manual operation, I suggested the Back Blow Air Nozzle with our Soft Grip Safety Air Gun.  This ergonomically designed Safety Air Gun is designed for hours of use without fatigue.  In combination with the nozzle, we are able to add extensions and chip shields.  With extensions, EXAIR has a range of lengths from 6” (152mm) to 72” (1,829mm).  With the designated length above, I recommended the model 1206SS-24-CS which has the Soft Grip Safety Air Gun, the model 1006SS Back Blow Air Nozzle, a 24” (610mm) extension, and a chip shield.

The configuration allowed for the operator to reach through the tube to clean with only a one-time pass.  The CS designation is for a chip shield which will protect the operator from any excess debris and coolant.  With the model 1206SS-24-CS, the operator could now pick up a tube, use the Soft-Grip Back Blow Safety Air Gun to remove the debris and coolant from within the round tubes, square tubes and rectangle tubes.  Also, they did not have to worry about changing the rags when it got dirty.  What an amazing purchase for this company, as they increased the speed of the cleaning operation by 70% without affecting the inside finish of the stainless-steel tubes.

If you need to clean the inside of tubes, hoses, pipes, etc., EXAIR has the perfect nozzle for you, the Back Blow Air Nozzles.  EXAIR can attach these nozzles on our VariBlast Compact, Soft Grip and Heavy Duty Safety Air Guns for easy-to-use manual operations.  For this customer above, they were glad that they contacted EXAIR about their application.  If you require more details, you can share your application with an Application Engineer at EXAIR.  We will be happy to help.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

 

Back Blow Nozzles Clean Inside Metal Tubes

A manufacturing plant EXAIR worked with made cast aluminum tubes for the automotive industry.  After the parts were cast, a machining operation would clean the ends.  This left coolant and metal shavings inside the tube.  Before going to assembly, they had to clean the part.  They created a two-tube fixture (reference picture above) to fit the 25mm tubes in place.

Two home-made nozzles were used to fit inside the tubes to blow compressed air.  The nozzles were attached to the ends of two 17mm pipes which supplied the compressed air.  A cylinder was used to push the nozzles from the top of the aluminum tube to the bottom then back up again.  The liquid emulsion and debris would be pushed downward into a collection drum.  When they started operating their system, the inside of the tubes still had contamination inside.  They wanted to improve their process, so they looked for an expert in nozzle designs, EXAIR.

Back Blow Air Nozzle Family

EXAIR designed and manufactures a nozzle for just this type of operation, the Back Blow Air Nozzles.  We offer three different sizes to fit inside a wide variety of diameters from ¼” (6.3mm) to 16” (406mm).  They are designed to clean tubing, pipes, hoses, and channels.  The 360o rear airflow pattern can “wipe” the entire internal surface from coolant, chips, and debris.  For the application above, I recommended the model 1006SS Back Blow Air Nozzle.  This 316SS robust design would fit inside the tubes above.  The range for this Back Blow Air Nozzle is from 7/8” (22mm) to 4” (102mm) diameters.  The customer did have to modify the function of the equipment by placing the cylinder and the rods under the aluminum tubes.  The reverse airflow would still push the contamination into the collection drum that was placed underneath the tubes.

After installing the model 1006SS onto the rods, the cleaning operation became more efficient.  Not only was the entire internal diameter getting clean, they were able to turn off the compressed air until they reached the top of the tube.  With the model 1006SS, they only needed one pass to clean.  This cut the air consumption in half, saving them much money by using less compressed air.  In addition, they were able to speed up their operation by 20%.  Cleaner tubes, less time, cost savings; they were happy that they contacted EXAIR for our expertise.

Reverse Air Flow

If you need to clean the inside of tubes, hoses, pipes, etc., EXAIR has the perfect nozzle for you, the Back Blow Air Nozzles.  EXAIR can also offer these nozzles on our VariBlast, Soft Grip and Heavy Duty Air Guns for manual operations.  They come with Chip Shields and extensions that can reach as far as 72” (1829mm).  Or like the customer above, automate the system to get a great non-contact cleaning.

If you require any more details, you can contact an Application Engineer at EXAIR.  We will be happy to help.

John Ball
Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Product Overview: Back Blow Safety Air Guns

BackBlowNozzle

EXAIR’s highly engineered and efficient Back Blow Nozzle’s provide a powerful 360° airflow through an array of holes to remove coolant, chips or debris.  Back Blow Nozzle’s are the perfect solution for cleaning out the inside of any pipe, tube, hose or channels.

They are available in three different sizes:

M4 X .5 BB Nozzle

.25 NPT BB

1 NPT BB

The Back Blow Nozzle’s are also offered on the VariBlast, Soft GripHeavy Duty, and Super Blast Safety Air Guns.  They can be configured with different length extensions (up to 72″) to make nearly any cleaning job within reach!   We recommend the optional Chip Shield since the air stream is carrying the debris back towards the operator.

1604SS-6-CS-lftangle
Variblast Safety Air Gun 1604SS-6-CS, Includes 1004SS Back Blow Nozzle With 6″ Extension and Chip Shield. The 1604SS Is Offered In 6″, 12″, 24″ and 36″ Lengths.
1204SS-6-CS
Soft Grip Safety Air Gun 1204SS-6-CS, Includes 1004SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1204SS Is Offered In 6″, 12″, 24″ and 36″ Lengths.
1206SS-6-CS559
Soft Grip Safety Air Gun 1206SS-6-CS, Includes 1006SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1206SS Is Offered In 12″, 18″, 24″, 36″, 48″, 60″ & 72″ Lengths.
1306SS-6-CS
Heavy Duty Safety Air Gun 1306SS-6-CS, Includes 1006SS Back Blow Nozzle With 6″ Extension and Chip Shield.  The 1306SS Is Offered In 12″, 18″, 24″, 36″, 48″, 60″ & 72″ Lengths.
1219ss800
Super Blast Safety Air Gun 1219SS, Includes 1008SS Back Blow Nozzle With 1′ Extension.  The 1219SS Is Offered In 1′, 3′ & 6′ Lengths.

Take it from me EXAIR’s Safety Air Guns fitted with a  Back Blow Nozzles are a must have for any operation that needs to remove debris from pipes, tubes or hose!

If you would like to discuss Safety Air Guns with Back Blow Nozzles or any of our quiet and efficient compressed air devices, I would enjoy hearing from you…give me a call.

Steve Harrison
Application Engineer
Send me an email
Find us on the Web 
Follow me on Twitter
Like us on Facebook