Cold Guns for Spot Cooling or Replacing Mist Systems

By using only a source of compressed air, the Cold Gun and High Power Cold Gun produces a stream of clean, cold air 50°F (28°C) below your compressed air supply temperature. The Cold Gun is very quiet at only 70 dBA and has no moving parts to wear out. Just supply it with clean compressed air and it’s maintenance free.

How does it work, and what are the benefits?

  • The Cold Gun uses compressed air to produce a stream of clean, cold air at 50°F (28°C) below supply air temperature. Generally this will be 20°F-30°F outlet temperature.
  • They use Vortex Tube technology…no moving parts to wear out.

How A Vortex Tube WorksInstant cold air flow with no moving parts!

  • Cold flow and temperature are preset to optimize cooling capability, and are non-adjustable to prevent freeze-up during use.
  • Eliminates the expense of both the purchase & disposal of cutting fluids when replacing expensive mist systems.
  • Removes the potential for health problems associated with breathing mist & vapors, and the safety issue of slipping on a wet floor.

Cold Gun Aircoolant System selection is easy & straightforward…we offer a standard, and a High Power version to meet your specific needs.

CG
Four systems to choose from, to meet most any need.

We also offer Single & Dual Point Hose Kits, to further meet the needs of your application.

One of the best applications I have seen with our cold gun came from a customer in Peru. They are a gold mining operation and they were having trouble with the liquid they were using to cool a saw. Read all about it here!

IMG_20180613_094120_HDR

If you have an application that you believe would be better served by the use of an EXAIR Cold Gun, give us a call.

Jordan Shouse
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

Georges J. Ranque and the Vortex Tube

The Vortex Tube was invented by accident in 1928, by George Ranque, a French physics student. He was performing experiments on a vortex-type pump that he had developed for vacuuming iron filings and noticed that warm air exhausted from one end and cold air from the other when he inserted a cone at one end of the tube! Ranque quickly stopped work on the pump, and started a company to take advantage of the commercial possibilities for this odd little device that produced both hot and cold air, using only compressed air, with no moving parts. The company was not successful, and the vortex tube was forgotten until 1945 when Rudolph Hilsch, a German physicist, published a widely read paper on the device.

How A Vortex Tube Works

A vortex tube uses compressed air as a power source, has no moving parts, and produces hot air from one end and cold air from the other. The volume and temperature of the two air streams is adjustable with a valve built into the hot air exhaust.  Temperatures as low as -50°F (-46°C) and as high as 260°F (127°C) are possible.

During the second world war Georges J. Ranque started developing steels that would be used in military aviation efforts. After the war he took a job at  Aubert et Duval steelworks as director of metallurgical laboratory where he continued developing alloys for use in the aviation industry.

In 1972 he published a book on the search for the Philosophers stone, a legendary chemical substance capable of turning base metals such as mercury into gold. And in 1973 he passed away in his home just outside of Paris.

If you have any questions of want more information on how we use our vortex tubes to better processes all over industry. Give us a call, we have a team of application engineers  ready to answer your questions and recommend a solution for your applications.

Jordan Shouse
Application Engineer
Find us on the Web http://www.exair.com/28/home.htm
Follow me on Twitter
Like us on Facebook

Meet EXAIR’s Newest Application Engineer, Jordan Shouse

Hello Everyone, my name is Jordan Shouse and I’m the newest addition to the Application Engineering group here at the EXAIR Corporation! I may be new to the team here at EXAIR, but I am not new to helping my customers save money and better their process.

me

My background is in Metrology, I’ve worked with countless sectors of manufacturing including Automotive, Aerospace and Pharma to examine their quality processes then design and implement a strategy to better the quality, reduce scrap and improve the product ship rate to their customer. Working as an Application Engineer is really my bread and butter, as I enjoy digging into the hardest cases and finding a solution that even surprises myself sometimes!
While I do enjoy my work, I also enjoy my personal life. I consider myself a bit of a outdoorsman, anything from camping and hiking to just exploring new areas of this amazing earth! The past few years I’ve really gotten into the ocean, so much that I started a Salt Water Reef Aquarium about a year ago and it amazes me every day. Watching a little ecosystem that’s so complex in a 100 gallon tank grow and progress is at times breathtaking! (A lot of work, but breathtaking)

yy.jpg

To discuss your application and how an EXAIR Intelligent Compressed Air Product can help your process, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Jordan Shouse
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS