The first new car I ever bought was a 1995 Ford Escort Wagon. I’ve mentioned this before in posts about preventive maintenance, the importance of proper filtration, and brand loyalty. Those blogs were primarily about my experiences with that little red wagon, but today I wanted to discuss the primary reason I bought the car in the first place.
I had a 50-mile round trip commute to work, and my old Pontiac Grand Prix with the small block V8 engine was a great ride for sure. Some quick math, however, showed that if I went with something with better gas mileage, I could save quite a bit of money on gasoline. My calculation was almost $1,000 a year, just on driving back & forth to work. After figuring in the rest of my driving for the first year, it was more like $1,400 a year.
Similar to my “upgrade” to a more fuel efficient vehicle, upgrading blowoff, cooling and drying operations using engineered compressed air products is Step #3 in EXAIR’s Six Steps To Optimizing Your Compressed Air System. We’ve assigned an order to these steps in accordance with basic good engineering practice & protocol, but it’s not necessary to follow them in any particular order. In fact, all six steps really don’t apply to every single compressed air system.
Step #3 does apply to most systems, though. I spent a fair amount of time in all sorts of industrial facilities in my previous roles, servicing industrial & chemical pumps, and almost all the time, regardless of the industry or the size of the facility, the maintenance part of the facility used air guns. However, I don’t recall ever seeing an engineered nozzle on one before I came to EXAIR. Since then, I’ve worked with a BUNCH of users to dramatically reduce compressed air consumption by replacing their cheap and inefficient air guns with EXAIR Safety Air Guns, or by retrofitting EXAIR Super Air Nozzles onto their existing air guns. We actually carry adapters to fit our Super Air Nozzles to a number of readily commercially available air guns for that very purpose.
In addition to air guns & nozzles, our Air Knives have a long history of replacing drilled pipes & pipe manifolds with inefficient nozzles used to make a curtain of air flow. The following chart details the savings you can realize from the use of a 24″ Super Air Knife instead of similar devices for a 24″ wide air curtain:
Our Case Study Library (registration required, but it’s free & fast) documents many real-world situations where customers worked with us to gather & publish “before/after” documentation, proving out the benefits of Step #3. I encourage you to check those out, and if you think you might have an opportunity to do a Case Study with us, we offer discounts or credit for that…give me a call.
Russ Bowman, CCASS
Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook