Reduce Sound Level in your Factory, Improve Worker Safety and Comfort

Checking the sound level in your processes is an important aspect of ensuring a safe working environment for your employees. Loud noises and the exposure time can lead to significant health concerns. Permanent hearing loss, increased stress levels due to the uncomfortable work environment, and potential injury due to lack of concentration or inability to hear the surroundings are all examples of some risks associated with a noisy environment.

The Occupational Safety and Health Administration, known by most simply as OSHA, introduced Standard 29 CFR 1910.95(a) as a means of protecting operators from injury associated with high noise levels. The chart below indicates maximum allowable exposure time based on different noise levels. At just 90 dBA, an operator can operate safely for 8 hours. Open end pipe blowoffs and some air guns fitted with cross drilled relief holes will often result in noise levels in excess of 100 dBA. At 110 dBA, permanent hearing loss can be experienced in just 30 minutes!

OSHA Chart

The first step to lowering your sound level is to take a baseline reading of your various processes and devices that are causing the noise. EXAIR’s Sound Level Meter, Model 9104, is an easy to use instrument that provides a digital readout of the sound level. They come with an NIST traceable calibration certificate and will allow you to determine what processes and areas are causing the most trouble.

SoundMeter_new_nist225

From there, EXAIR has a wide range of Intelligent Compressed Air Products® that are designed to reduce compressed air consumption as well as sound levels. For noisy blowoffs where you’re currently using an open-ended pipe or a loud cross-drilled nozzle, EXAIR’s Super Air Nozzles are the ideal solution. Not only will they pay for themselves over time due to compressed air savings, but your operators will thank you when they’re able to hear later on in life!!

Drilled pipe is another common culprit of high noise levels. Rather than purchasing an engineered solution, the idea is that a simple drilled pipe is just as effective right? Not at all!! Not only does a drilled pipe produce exceptionally high sound levels, but the amount of compressed air used is also very inefficient. EXAIR’s Super Air Knife is available in lengths ranging from 3”-108” and has a sound level of just 69 dBA at 80 PSIG. At this sound level, operators won’t even require hearing protection at all!

SAK vs drilled pipe
EXAIR’s Super Air Knife is the ideal solution for replacing noisy, inefficient drilled pipe

With all of these products available in stock, EXAIR has the tools you need to reduce sound level in your processes. If you’d like to talk to an Application Engineer about any applications that you feel could benefit from a sound reduction, give us a call.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

EXAIR’s High Velocity and Adjustable Air Jets – Now Available in Stainless Steel

Newly released, the EXAIR High Velocity Air Jet and Adjustable Air Jet are now available in Type 303 Stainless Steel, providing greater durability, corrosion resistance and a higher maximum temperature rating of 400 °F.  Type 303 stainless steel has good resistance to mildly corrosive atmospheres along with good oxidation resistance at elevated temperatures, making the stainless steel Air Jet a great choice for blowoff or part drying in your harsh environment. Both types of Air Jets are also available in brass, for applications at 275°F and below, and when corrosion resistance is not as critical.

6013ss
Model 6013SS – High Velocity Air Jet

Air Jets utilize the Coanda Effect – wall attachment of a high velocity fluid – to produce air motion in their surroundings. As illustrated above, a small amount of compressed air to the inlet (large black arrow) is throttled through an internal ring nozzle above sonic velocity.  A vacuum is produced, resulting in large volumes of surrounding, or “free” air, being pulled in through the jet (blue arrows.)

air jet How Air Jets Work

Both the outlet and inlet can be ducted for remote positioning applications.

If the end is blocked, flow simply reverses at well below OSHA dead end pressure requirements, ensuring safe operation.

The High Velocity Air Jet comes standard with an .015″ shim, and a Shim Set is offered that includes .006″ and  .009″ shims to provide additional adjustability and control.  The Adjustable Air Jet has a variable gap design, and can be adjusted and locked to meet the required airflow and thrust parameters.

When you are needing a simple solution to reduce excessive air consumption and noise levels on compressed air blowoff operations, EXAIR has a large line of Air Nozzles and Jets to solve your problems. You can contact an Application Engineer to discuss which Air Jet or Nozzle to best fit your application.

Brian Bergmann
Application Engineer

Send me an email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_BB