In boxing, there are five basic punches, and they’re commonly called out by numbers so that trainers can instruct boxers rapidly during the development of fundamentals. It’s also useful for them in real live bouts, where overly complicated plans can lead to defeat….former heavyweight champion Mike Tyson famously said, “everyone has a plan until they get punched in the mouth.” Those five basic punches are:
- #1: The jab. Just like it sounds, this is a punch thrown directly forward with the lead hand. In many combinations, it’s the first punch thrown (that’s why it’s #1).
- #2: The cross. This is a more powerful punch thrown with the back, or dominant, hand, and gets its power from the torque & rotation of the boxer’s body, when thrown correctly.
- #3: The lead hook. This is an even more powerful punch than the cross. Its power comes not only from rotating the torso (like the cross) but also by pivoting on the lead foot to get the hip & shoulder involved. Because of the unbalanced and relatively unguarded position it leaves the boxer in, it’s riskier than a jab or cross, and oftentimes reserved for situations where the boxer sees an opportunity to score a knockout blow. If that plan doesn’t work, Mike Tyson’s famous quote above may very well come to fruition.
- #4: The right uppercut. This is another devastating punch, thrown by the boxer’s dominant hand (assuming they’re right-handed) in an upward motion to contact the opponent’s head or body. If it connects to the chin or solar plexus, there’s a good chance the opponent will end up on the mat. It has to be thrown while the boxer is in close with the opponent, which gives the opponent the option to deal a devastating blow as well.
- #5: The left uppercut. Same as above, but thrown with the boxer’s lead, or less dominant hand (again, assuming they’re right-handed.)
Because it generally leaves the boxer in a better defense position, the “one-two” combination is by far one of the most used moves in the ring. The term has even found its way into the popular vernacular, meaning two things that happen in rapid succession that lead to the desired outcome.
For the purposes of today’s blog (as the title suggests), I’m going to use it to describe an application where a customer uses two EXAIR products: a Model 1006SS Back Blow Air Nozzle, and a Model 6082 1″ Aluminum Line Vac in conjunction with each other.
This particular customer uses the Back Blow Air Nozzle to blow out the injector bore of an engine cylinder head assembly.
Thing is, they don’t want the debris flying all over the place. We considered a Chip Shield on the 1/4″ pipe extension that the Back Blow Air Nozzle was threaded onto, but since they insert it vertically from above, that could allow for debris to fall back down onto the assembly, and possibly right back into the injector bore, or one of the other openings on top. Instead, they opted for a Line Vac to vacuum the debris away as the Back Blow Air Nozzle blew it out of the hole.
Engineered compressed air products have a multitude of advantages in applications like this. They’re durable & reliable. They have no moving parts to wear, or electrical components to burn out. They can operate continuously if needed, or they can be cycled on & off rapidly with no ill effects. If you’d like to find out how EXAIR Intelligent Compressed Air Products can help your operation, give me a call.
Russ Bowman, CCASS
Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook
