Optimizing Your Current Compressed Air System Is Simple

A few weeks ago, we posted a blog discussing how artificial demand and leaks can lead to poor performance and expensive waste.  Today, I’d like to review how following a few simple steps can help optimize your current compressed air system and reduce compressed air usage.

The first step you want to consider is measuring the air usage in the system. To do this, you want to start at the compressor and check individual leads to each drop point to a blowoff device, record your findings to track the demand. By measuring your compressed air usage, you can locate the source of high usage areas and monitor the usage on each leg of the system. If the demand exceeds the supply, there is potential for problems to arise, such as lowered pressure and force from compressed air operated devices leading to irregular performance.

Digital Flowmeter with wireless capability

EXAIR’s Digital Flowmeters are designed to measure flow continuously and accurately to give you real-time flow measurements of your compressed air system to help identify problems areas.

Step 2 is to locate the source of waste. Again, compressed air leaks can result in a waste of up to 30% of a facility’s compressor output. A compressed air leak detection and repair program can save a facility this wasted air. Implementing such a program can be used as a way for a facility to “find” additional air compressor capacity for new projects. Whenever a leak occurs, it will generate an ultrasonic noise.

Model # 9061 Ultrasonic Leak Detector

Our Ultrasonic Leak Detector is designed to locate the source of ultrasonic sound emissions up to 20’ away. These ultrasonic sound emissions are converted to a range that can be heard by humans. The sound is 32 times lower in frequency than the sound being received, making the inaudible leaks, audible through the included headphones and the LED display gives a visual representation of the leak.

The 3rd step involves finding the source of noisy and wasteful blowoffs, like open pipes or homemade blowoffs, and replacing them with an energy efficient, engineered solution. By replacing these devices, you are not only reducing the amount of waste but also improving operator safety by complying with OSHA safety requirements.

Model # 9104 Digital Sound Level Meter

EXAIR’s Digital Sound Level Meter is an easy to use instrument that measures and monitors the sound level pressure in a wide variety of industrial environments. The source of loud noises can be quickly identified so that corrective measures can be taken to keep sound levels at or below OSHA maximum allowable exposure limits.

The easiest way to reduce compressed air usage and save on operating expense is to turn off the compressed air to a device when it isn’t needed, step 4 in the process. Not only will this save money, in many cases, it can also simplify a process for the operator.

 

Sizes from 1/4″ NPT up to 1-1/4″ NPT are available

A simple manual ball valve and a responsible operator can provide savings at every opportunity to shut down the air flow.

 

120VAC, 240VAC or 24VDC

 

For automated solutions, a solenoid valve can be operated from a machine’s control. For example, if the machine is off, or a conveyor has stopped – close the solenoid valve and save the air.

 

 

Model # 9040 Foot Valve

A foot pedal valve offers a hands free solution to activate an air operated device only when needed, such as being implemented in an operator’s work station.

 

EFC – Electronic Flow Control

For even more control, you can use a device like our EFC or Electronic Flow Control. This helps minimize compressed air usage by incorporating a programmable timing controlled (0.10 seconds to 120 hours) photoelectric sensor to turn off the compressed air supply when there are no parts present. It is suited for NEMA 4 environments and can be easily wired for 100-240VAC.

 

 

Step 5, intermediate storage. Some applications require an intermittent demand for a high volume of compressed air. By installing a receiver tank near the point of high demand, there is an additional supply of compressed air available for a short duration. This will help eliminate fluctuations in pressure and volume.

Model # 9500-60

EXAIR offers a 60 gallon, ASME approved vertical steel tank with mounting feet for easy installation near high demand processes.

Many pneumatic product manufacturers have a certain set of specifications regarding performance at stated input pressures. In many applications, or in the case of using a homemade blowoff device like open pipe, these wouldn’t necessarily require the full rated performance of the device or full line pressure. Controlling the air pressure at the point-of-use device will help to minimize air consumption and waste, step 6.

Pressure Regulators permit easy selection of the operating pressure

By simply installing a pressure regulator on the supply side, you can start off at a low pressure setting and increase the pressure until the desired result is achieved. Not only will this help to conserve energy by only using the amount of air required for the application, it also allows you to fine tune the performance of the point-of-use device to match the application requirements.

If you have any questions, please contact an application engineer at 800-903-9247.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

 

EXAIR Products: Silencing Mufflers Overview

OSHA Standard 29 CFR 1910.95(a), relating to permissible noise exposure levels, states that when employees are subjected to sounds in excess of 90 dBA, some type of control should be used to reduce the sound level. In an industrial setting, it’s very common to find the exhausting air from air operated devices such as actuators, diaphragm pumps or cylinders for example, to produce sound levels well above the allowable limits set forth in the Standard. EXAIR offers a variety of different Silencing Mufflers that help to reduce this  noise level, while also increasing operator safety.

 

Reclassifying Mufflers are available in 1/8″, 1/4″, 3/8″, 1/2″, 3/4″ and 1″ NPT sizes

EXAIR’s Reclassifying Mufflers offer noise reduction up to 35 dB and are available in sizes ranging from 1/8″ to 1″ NPT. These types of mufflers are often considered”dual-purpose” as they not only reduce the noise level but also remove oil from the exhaust airflow by incorporating a removable filter element.  The exhausting oil mist is reduced from 50 PPM (parts per million) to only 0.015 PPM, when the device is operated at 100 PSIG. In addition, there is a bowl on the bottom to capture any residual oil and a 1/4″ tube adaptor to allow for easy draining.

Sintered Bronze Mufflers are available in #10-32, 1/8″, 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/4″ and 1-1/2″ NPT sizes, as well as 1/2-20 UNF female for use with solenoid valves
Straight Through Mufflers are available in 1/4″, 3/8″ and 3/4″ MNPT x FNPT

Sintered Bronze Mufflers are a relatively low cost option, commonly used with air cylinders as they can be installed quick and easy. We offer 1o different sizes, ranging from #10-32 for small installations, up to 1-1/2″ NPT for larger scale applications. The noise reduction depends on the size of the muffler and back pressure, which can occur from dirt or particulate clogging the muffler, restricting the exhausting airflow from passing through the porous sintered bronze.

Our Straight Through Mufflers are made of corrosion resistant aluminum and are lined with a sound absorbing foam, capable of reducing noise levels up to 20 dB. We offer 3 different sizes, 1/4″, 3/8″ and 3/4″ NPT, with a male thread on one end and female thread on the other. We incorporate this muffler design into our Cold Guns and Adjustable Spot Coolers and they are commonly used with our Vortex Tubes, Cabinet Cooler® Systems and E-Vac® Vacuum Generators as well.

Heavy Duty Mufflers are available in 1/4″ and 3/8″ FNPT

Lastly, the Heavy Duty Mufflers feature an internal, 50 mesh stainless steel screen, to protect against contaminants in the airflow,  and a corrosion resistant aluminum outer shell. In most cases, the sound reduction can be as high as 14 dB and we offer 2 different sizes, 1/4″ and 3/8″ FNPT. These types of mufflers are regularly used on the hot air exhaust of our Vortex Tubes.

For help with product selection or to discuss a particular process, please contact one of our application engineers at 800-903-9247.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

Air Nozzles Blowoff Guide Available For FREE

Are you looking for an engineered Air Nozzle to replace your existing unsafe open pipe? Maybe you are wanting to reduce the sound level in your facility or decrease your energy costs? EXAIR offers a large variety of Air Nozzles that are ALL OSHA compliant to meet or exceed OSHA Standard 1910.242(b), by eliminating any potential for dead-ending the air flow out of the nozzle and keeping the outlet pressure safe. The design of our Super Air Nozzles ejects the compressed  air behind a series of fins so there is always path for the air to escape, meaning they cannot be dead ended.

OSHA Noise Level
ALL of EXAIR’s Air Nozzles meet or exceed noise exposure levels.

In addition, our air nozzles meet the OSHA Standard 29 CFR – 1910.95(a) for allowable noise exposure levels. Excessive noise in the workplace can cause stress, lack of concentration leading to accidents and potential long term hearing loss (More OSHA Noise Induced Hearing Loss info here). EXAIR’s air nozzles entrain surrounding ambient air up to 25 times for every 1 part of compressed air, producing much less wind shear, reducing the output sound level, while also making our units more efficient, consuming less compressed air.

 

air nozzle flow
How our Super Air Nozzles entrain surrounding air.

We offer nozzles from our smallest offering with a tiny M4 thread up to our largest 1-1/4 NPT unit, with varying force from 2 ounces up to 23 lbs., in zinc aluminum, stainless steel, brass or PEEK plastic.

With such a vast offering, we understand selection can seem difficult. To simplify the process we offer our Air Nozzles Blowoff Guide. Our FREE Blowoff Guide has all the information available in regards to force, dimensions, air flow patterns, air consumption and materials.You will also find detailed information about our full product line of Safety Air Guns as well.

blowoff guide
Order our complimentary Blowoff Guide today!

To order our complimentary blowoff guide, please click here. If you need additional information, please give us a call at 800-903-9247.

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN