Tourney Time!

This week begins my favorite time of year – college basketball madness!

Basketball hoop
It’s Awesome baby, with a capital A!

Like many of us around the country, my fan loyalty resides with a relatively small, local college that has seen a lot of program growth in recent years – Xavier University. For example, during the 2003-2004 season, the team was ranked preseason top 11 in the country but stumbled along the way and found themselves at 10-8 with a pivotal game against their in state, conference rival. They ended up losing the game and the players held a “team only” meeting afterwards so the seniors could, let’s just say, “focus” the team on their goals. Whatever was said in that locker room worked, as the team went on to finish the regular season with a 9-1 record and win 4 conference tourney games in 4 days (first team to ever tackle this feat) to capture the automatic bid to the national field of 64, where they eventually lost by only 3 points in their first ever Elite 8, to a certain team from Durham, NC. (It was the REFS fault and no I’m not bitter LOL).

In 2008 the team was facing a similar challenge as they had lost several close games and were now again faced with needing to win 4 games in 4 days to get the automatic conference title bid. They went on to secure the bid and were able to reach the Elite 8 again for the 2nd time in 4 years but their run ended with a loss to the #1 seed in the region. The school has now joined a larger conference which is great for national notoriety and recruiting but also brings a higher level in competition, either boosting or damaging their tournament resume.

This year has followed suit to previous years as the team didn’t perform up to expectations and spent much of the latter part of the regular season on the proverbial “bubble”. After each win or loss, the prognosticators would move them from a “lock” to the “bubble”, or even more confusing, “still has work to do” category. All that mattered was just win and let the rest take care of itself. The team did just that as they went on to make the finals of the conference tournament but were easily handled by the first place team and eventually lost.

The selection committee has rewarded their conference affiliation along with conference tournament success and ranked them as a 6 seed for this years national championship tournament (a little high in my opinion but I’ll take it!) playing the winner of one of the play-in games.

Who knows what tournament success or failure lies ahead but that is what makes this time of year so awesome. Even when my team loses, there is always a local team, an underdog or the year’s “Cinderella” that grasps the country’s attention and makes it hard to root against them. Since we are in Cincinnati, many of our folks live in Kentucky and the Wildcats prove their wide reach among many of our Ohio based people as well. It makes the office banter and challenges and trash talk more interesting when pitting the hopes of a small “bubble” team up against a behemoth like Kentucky. We would be remiss not to mention the other behemoth with a huge fan base in this neck of the woods, Ohio State. We cannot forget our loyal base of University of Cincinnati Bearcats, who have provided us with some stellar employees, though not much of a basketball team this year (I’m a Xavier fan, remember?). And with the late breaking news from last night’s winning Dayton Flyer team, we have some solid regional representation in the tourney year.

Wow, now that I think about it, we’ll be lucky to survive the next few weeks without a bit of office bloodshed. At the very least, a small skirmish is certain to happen ;-).

Here at EXAIR we have a great team too! From the production team all the way up to management, we understand that we need to remain focused on our main goal – to satisfy YOU, our customer! We are always striving to get better by developing new products, testing existing products or maintaining near perfect (99.9%) on-time shipments.

To put our team to work for you, give us a call!

And to all who may be distracted throughout these next four days – Good luck to your team as well!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

 

Basketball hoop image courtesy of Steve Johnson. Creative Commons License

EXAIR Nozzle Improves Safety & Worker Comfort

This week’s adventures in using compressed air arrives from an unexpected source: installing handlebar grips on a bicycle. The customer used a compressed air gun with an open tube which is not OSHA safe and is LOUD! (pictured below)

image3
This original nozzle does not comply with OSHA’s dead end pressure standard and is exceptionally loud.

The bicycle shop would slip the nozzle of the air gun under the rubber handlebar grips to expand them to slide onto the frames easily.  The original nozzle of the gun did not have a relief port in the nozzle to prevent pressurization over 30 PSIG as mandated by OSHA instruction STD 01-13-0001. On top of the over-pressurization problem, the gun was incredibly noisy. This noise was the reason for their call. During the course of our phone conversation, we also discussed the safety aspect of their application. If you need more information on OSHA’s regulation regarding compressed air please see my blog “Complying with OSHA’s Compressed Air Standard”.

image4
Customer slipping on a bicycle handlebar using a 1410SS Precision Safety Air Gun

The bicycle repair shop was relatively quiet, so the noise from the 0.175″ opening of the original safety air gun affected a number of shop employees. Every year more and more studies point to a link between occupational noise and health, well being, and productivity. This repair shop had a relatively low noise level in most working hours, so the noise of the air gun continuously rattling through rafters not only threatened the operators’ hearing but also may have affected them in other ways.  The technician manager of the repair shop had heard complaints from operators and called one of EXAIR’s Application Engineers to find a quieter solution. Our solution was the Precision Safety Air Gun, model 1410SS, was the perfect solution. The 1/4″ Nano Super Air Nozzle is 1/4″ in diameter which was able to easily slip underneath the handlebar grips. The gun would then be triggered which allow air to fill the handlebar grip, which caused it to expand just enough to slip onto the bike frame.

Originally, the air gun produced noise levels of over 90 dB every time the gun was triggered. EXAIR’s 1410SS Precision Safety Air Gun only produced a noise level of 75 dB, which is much more manageable in their shop environment. The gun also features EXAIR Super Air Nozzle design which conserves compressed air and complies with OSHA standard 1910.242(b), which prevents the outlet pressure from exceeding 30 PSIG.

Dave Woerner
Application Engineer
@EXAIR_DW
DaveWoerner@EXAIR.com

Super Air Wipe Blows Electric Resistance Welded Pipe Clean During Manufacture

SAW pipe
Super Air Wipe Blows Off Pipe

A manufacturer of Electric Resistance Welded (ERW) pipes contact us recently. They were trying to make improvements to an existing pipe mill where pipes of diameters 3-1/2” up to 8-5/8” diameter are being processed. They had previously used our Super Air Wipe product on a smaller line that produced pipe in the 2-3/8” to 3-1/2” outside diameter range with great success. So, they wanted to know what we had that could blow off the outside diameter of their large product.

It so happens that EXAIR produces the Super Air Wipe product up to 11 inch inside diameter. With such a size, the Super Air Wipe has capability to blow off and cool pipes up to about 10 inch diameter. This capability was well within the need for our customer.

Previously, the customer had been using a series of open pipes that terminated into a ring around their product to blow off coolant used during the final phases of production. This solution was extremely loud and used a large volume of air which ran continuously while the mill was in operation. Also, the finish produced was not quite as consistent as the customer wanted. The inconsistent velocity between the home made “nozzles” caused lines to form on the pipe’s outer surface finish that were not appealing.

The Super Air Wipe was able to harness the compressed air into a more manageable flow with even velocity all the way round the outside of the pipe. The sound level dropped considerably, the flow rate dropped down to a much more reasonable level for the customer and the visual quality of their final product had no lines as before.

The pipes produced at this particular facility were used in the oil and gas industry. However, any application where pipes, hoses, tubes and any other round forms need to be blown off or cooled with air create good opportunity to take advantage of the features that an EXAIR Super Air Wipe bring to the application.

Neal Raker, International Sales Manager
nealraker@exair.com

Video: How To Install A Cold Air Distribution Kit

The video below shows how to install an EXAIR Cabinet Cooler’s Cold Air Distribution Kit

Lee Evans
Application Engineer
LeeEvans@EXAIR.com
@EXAIR_LE