OSHA Standard 1910.242(b) discusses the use of compressed air for cleaning and blowoff. It states that the use of compressed air for cleaning purposes is prohibited if the dead-ended pressure exceeds 30 psig. This phrase means the downstream pressure of the air nozzle or gun, used for cleaning purposes, will remain at a pressure level below 30 psig for all static conditions. In the event that dead ending occurs, the static pressure at the main orifice shall not exceed 30 psi. If it does exceed this pressure, there is a very high potential for it to create an air embolism. An air embolism, left untreated, can quickly impede the flow of blood throughout the body. This can lead to stroke, heart attack, and sometimes death.
So making sure you are in compliance with 1910.242(b) is truly a life and death situation. Most people believe that lowering the pressure to the blow off device is the only method to keep their operators safe from an air embolism. However this can become a problem when you really need the force of greater than 30 PSIG to complete your operation. We at EXAIR want to give you the flexibility to run at any pressure with out the risk of building that 30 PSI of dead-end pressure! We do this with our line of Intelligent Compressed Air® nozzles! All of EXAIR’s Air Nozzles are designed so that the flow cannot be dead-ended. The fins on the Super Air Nozzles are not only useful in amplifying the force by drawing in ambient air, but they also prevent an operator from completely obstructing the airflow.
Another great example of this is our 2″ Flat super air nozzle. The design not only allows the nozzle to amplify the air flow in the blast of air, the over hang will not let the dead end pressure build as it can escape around the edges and bottom!
If you’ve got questions about compressed air safety or have an existing blowoff in place that does not adhere to this OSHA directive, give us a call. We’ll be sure to recommend a solution that will keep your operators and wallets safe!
EXAIR prides itself in offering products with high-performance and peak efficiency. All EXAIR products are manufactured to meet the strict requirements of a variety of different standards, ensuring that you receive a reliable, high quality product that WILL perform to the specifications we publish.
Safety is a top priority for most companies, EXAIR’s line of Intelligent Compressed Air Products meet or exceed the strict safety standards set forth by both OSHA and the European Union. EXAIR products comply with OSHA 29 CFR 1910.242(b), the standard implemented to ensure safe operation of compressed air blowoff devices, and the EU General Product Safety Directive (2001/95/EC).
Additionally, they comply with the noise limitation requirements set forth under 29 CFR 1910.95(a) and the EU Machinery Directive (2006/42/EC). From the Optimization product line, EXAIR’s Electronic Flow Control and the Electronic Temperature Control meet the low voltage standards of EU Low Voltage Directive (2006/95/EC). A CE label is placed on all products that comply with applicable directives.
UL, or Underwriters Laboratories, is a third-party safety and consulting organization that certifies products after thorough testing and evaluation. EXAIR’s Cabinet Coolers are UL Listed to US and Canadian safety standards. Static Eliminators are also UL Component Recognized. Within our line of Cabinet Coolers is the Hazardous Location Cabinet Cooler, bearing the Classified UL mark for use in classified areas.
In the assembly of electrical products there can be hazardous materials used during production. The Restriction of Hazardous Substances, also known as RoHS or (2002/95/EC), restricts the use of materials such as: lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and four different phthalates. The electrical portions of EXAIR’s Static Eliminators, Electronic Flow Control, Electronic Temperature Control, Digital Flowmeter, solenoid valves, and thermostats all comply with the amendment outlined in the European Commission decision L 214/65.
In addition to RoHS, EXAIR is also committed to providing products that are conflict mineral free. In support of Section 1502 of the Dodd-Frank Wall Street Reform and Consumer protection Act, EXAIR complies with the conflict minerals rule to curb illicit trade of tin, tantalum, tungsten and gold in the DRC region. Using the CMRT 4.20 template, we’re able to document our supply chain to ensure our materials are not being sourced from places that could finance conflict in the DRC and surrounding countries.
Finally, per Regulation (EC) No 1907/2006 Title I, Article 3, paragraph 3, the European Union enacted legislation requiring substances and chemicals imported into the EU to be registered to ensure a high level of protection for human health and the environment. Per Title II, Article 7, paragraph 1, articles must be registered when a substance is intended to be released during normal conditions of use that would exceed 1 metric ton per producer per year. Since EXAIR products do not contain substances that are intentionally released, registration is not required.
If you’re looking to maintain compliance in your industry, EXAIR products have you covered. If you have any questions about these standards of compliance feel free to reach out to us. Our team of Application Engineers have years of experience in industry are waiting to take your call.
I’m pretty impressed with the number of safety features my car has. Aside from the literal lifesaving functions like seat belts and air bags, it’s got anti-lock brakes…if you’ve ever had to counter-steer out of a skid on an icy road, you will appreciate the value of this for sure. Those are just some of the ones I’m keenly aware of – the Federal Motor Vehicle Safety Standards comprise dozens of regulations in three categories: crash avoidance, crashworthiness, and post-crash survivability. None of these prevent me from operating my vehicle at an unsafe rate of speed…an expensive reality that an Ohio State Highway Patrolman dutifully reminded me of last Sunday afternoon.
Likewise, there are many regulations to ensure safety and prevent hazards of all kinds in industry, administered by a host of agencies that are either subordinates of, or accountable to, the federal government. When you manufacture products that are used with high energy sources (compressed air or high voltage electricity,) a strong commitment to safety is not negotiable. So, at EXAIR, we commit considerable resources towards the best engineering and manufacturing practices to make our products as safe as possible. That includes compliance with a number of standards and certifications:
The Occupational Safety and Health Administration (OSHA) is an agency of the U.S. Department of Labor. Their mission is to “assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance.” They are a regulatory body in the truest sense, in that they don’t offer certification or approval of products, processes, etc.; they publish guidelines and standards for manufacturers and users to comply with. OSHA Standard 1910.242(b), for instance, limits the downstream pressure of a compressed air operated device used for cleaning purposes to 30psi. Now, you can regulate the supply pressure to meet this, but that also limits the effectiveness of the air flow generated. EXAIR Intelligent Compressed Air Products are all designed and manufactured to be in compliance with this standard, at any supply pressure. Take, for example, our Super Air Nozzles:
OSHA also has Standard 1910.95(a), that sets limits for maximum allowable noise exposure. All EXAIR Intelligent Compressed Air Products, with the exception of some our largest and most power Super Air Nozzles (which aren’t normally used in areas that don’t already require hearing protection anyway) meet the 8-hour exposure limits of this standard.
CE marking indicates conformity with health, safety, and environmental protection standards for products sold withing the European Economic Area. Unlike OSHA standards, responsibility for CE marking falls solely with the seller of the product – a CE marked product has been tested and certified to have been made in such a way to meet safety & quality benchmarks specified for that type of product. All EXAIR products that are defined under applicable directives have been tested according to these standards, and carry the CE mark.
The Restriction of Hazardous Substances Directive, or RoHS, is another standard borne from the European Union, and is geared towards public & workplace safety by restricting the use of hazardous materials in the manufacture of electronic & electrical equipment. Since its inception in 2006, similar standards have been vigorously adopted around the globe. Electrical portions of EXAIR’s Static Eliminators, EFC Electronic Flow Controls, ETC Electronic Temperature Controls, Digital Flowmeters, Solenoid Valves, and Thermostats all comply with the RoHS Directive.
Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act doesn’t address a concern for product users, but rather a particularly troubling human rights issue – Conflict Minerals. For almost two decades, trade in tin, tantalum, tungsten and gold in the Democratic Republic of the Congo (DRC) has been used by some very bad people to finance violent campaigns against their neighbors. EXAIR thoroughly and systematically documents our supply chain compliance with this act. We are proudly committed to our support for this effort to the world a better place for everyone…especially those in desperate circumstances beyond their control.
EXAIR Intelligent Compressed Air Products have been successfully implemented into a variety of uses where application- or industry-specific standards are in force. We’re happy to work with you to determine if our products meet those standards…or can be made to meet them. If you’ve got such an application, give me a call.
Visit us on the Web
Follow me on Twitter
Like us on Facebook
OSHA Standard 1910.242(b) discusses the use of compressed air for cleaning and blowoff. It states that the use of compressed air for cleaning purposes is prohibited if the dead-ended pressure exceeds 30 psig. This phrase means the downstream pressure of the air nozzle or gun, used for cleaning purposes, will remain at a pressure level below 30 psig for all static conditions. In the event that dead ending occurs, the static pressure at the main orifice shall not exceed 30 psi. If it does exceed this pressure, there is a very high potential for it to create an air embolism. An air embolism, left untreated, can quickly impede the flow of blood throughout the body. This can lead to stroke, heart attack, and sometimes death. Take a look at the animation below to see how an air embolism can affect the body.
With this in mind, there are only two options for staying within compliance of this standard. Either install an engineered solution that will reduce the air pressure to less than 30 psig if dead-ended, or regulate the pressure below 30 psig. For the vast majority of operations, regulating the input pressure below 30 psig is useless. The force and flow from the nozzle at this pressure is greatly reduced and likely not enough to be effective in most applications. All of EXAIR’s Safety Air Guns are designed so that the flow cannot be dead-ended. The fins on the Super Air Nozzles are not only useful in amplifying the force by drawing in ambient air, but they also prevent an operator from completely obstructing the airflow.
In addition to being concerned about dead-end pressure, OSHA 1910.242(b) also states that compressed air used for cleaning should include effective chip guarding. By this, they mean that some method or equipment must be installed that will prevent chips and particles from coming back into the eyes or skin of the operator. In addition to offering OSHA compliant nozzles and guns, EXAIR also has Chip Shields that can be installed onto any of our Safety Air Guns. The polycarbonate shields protect the operator from any flying debris while performing a drying or blowoff operation. Simply add a “-CS” to the end of any Safety Air Gun Model number to have a Chip Shield installed on the gun.
The Occupational Safety and Health Act of 1970 does not contain any provisions that allow for the approval or endorsement of equipment. Alteration or the misapplication of what was once a safe piece of equipment would create a dangerous scenario that is out of the control of the original manufacturer. Any nozzles or guns marketed as “OSHA approved” should immediately throw up a red flag. Identifying and implementing a safe, OSHA compliant solution rests in the hands of the manufacturer themselves. If you’ve got questions about compressed air safety or have an existing blowoff in place that does not adhere to this OSHA directive, give us a call. We’ll be sure to recommend a solution that will keep your operators and wallets safe!