EXAIR Intelligent Compressed Air Products: Leading the Way in Standards Compliance

EXAIR prides itself in offering products with high-performance and peak efficiency. All EXAIR products are manufactured to meet the strict requirements of a variety of different standards, ensuring that you receive a reliable, high quality product that WILL perform to the specifications we publish.

Safety is a top priority for most companies, EXAIR’s line of Intelligent Compressed Air Products meet or exceed the strict safety standards set forth by both OSHA and the European Union. EXAIR products comply with OSHA 29 CFR 1910.242(b), the standard implemented to ensure safe operation of compressed air blowoff devices, and the EU General Product Safety Directive (2001/95/EC).

sag-osha-compliant
The engineered design of our Super Air Nozzles prevents compressed air from penetrating the skin by eliminating the potential of dead-ending when pressed against the skin.

OSHA Chart

Additionally, they comply with the noise limitation requirements set forth under 29 CFR 1910.95(a) and the EU Machinery Directive (2006/42/EC). From the Optimization product line, EXAIR’s Electronic Flow Control and the Electronic Temperature Control meet the low voltage standards of EU Low Voltage Directive (2006/95/EC). A CE label is placed on all products that comply with applicable directives.

UL

UL, or Underwriters Laboratories, is a third-party safety and consulting organization that certifies products after thorough testing and evaluation. EXAIR’s Cabinet Coolers are UL Listed to US and Canadian safety standards. Static Eliminators are also UL Component Recognized. Within our line of Cabinet Coolers is the Hazardous Location Cabinet Cooler, bearing the Classified UL mark for use in classified areas.

ROHS_Vector

In the assembly of electrical products there can be hazardous materials used during production. The Restriction of Hazardous Substances, also known as RoHS or (2002/95/EC), restricts the use of materials such as: lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and four different phthalates. The electrical portions of EXAIR’s Static Eliminators, Electronic Flow Control, Electronic Temperature Control, Digital Flowmeter, solenoid valves, and thermostats all comply with the amendment outlined in the European Commission decision L 214/65.

In addition to RoHS, EXAIR is also committed to providing products that are conflict mineral free. In support ofconflictfree_v2 Section 1502 of the Dodd-Frank Wall Street Reform and Consumer protection Act, EXAIR complies with the conflict minerals rule to curb illicit trade of tin, tantalum, tungsten and gold in the DRC region. Using the CMRT 4.20 template, we’re able to document our supply chain to ensure our materials are not being sourced from places that could finance conflict in the DRC and surrounding countries.

reachFinally, per Regulation (EC) No 1907/2006 Title I, Article 3, paragraph 3, the European Union enacted legislation requiring substances and chemicals imported into the EU to be registered to ensure a high level of protection for human health and the environment. Per Title II, Article 7, paragraph 1, articles must be registered when a substance is intended to be released during normal conditions of use that would exceed 1 metric ton per producer per year. Since EXAIR products do not contain substances that are intentionally released, registration is not required.

If you’re looking to maintain compliance in your industry, EXAIR products have you covered. If you have any questions about these standards of compliance feel free to reach out to us. Our team of Application Engineers have years of experience in industry are waiting to take your call.

Tyler Daniel
Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD

Standards, Compliance, And You. And EXAIR.

I’m pretty impressed with the number of safety features my car has. Aside from the literal lifesaving functions like seat belts and air bags, it’s got anti-lock brakes…if you’ve ever had to counter-steer out of a skid on an icy road, you will appreciate the value of this for sure.  Those are just some of the ones I’m keenly aware of – the Federal Motor Vehicle Safety Standards comprise dozens of regulations in three categories: crash avoidance, crashworthiness, and post-crash survivability.  None of these prevent me from operating my vehicle at an unsafe rate of speed…an expensive reality that an Ohio State Highway Patrolman dutifully reminded me of last Sunday afternoon.

Likewise, there are many regulations to ensure safety and prevent hazards of all kinds in industry, administered by a host of agencies that are either subordinates of, or accountable to, the federal government.  When you manufacture products that are used with high energy sources (compressed air or high voltage electricity,) a strong commitment to safety is not negotiable.  So, at EXAIR, we commit considerable resources towards the best engineering and manufacturing practices to make our products as safe as possible.  That includes compliance with a number of standards and certifications:

The Occupational Safety and Health Administration (OSHA) is an agency of the U.S. Department of Labor.  Their mission is to “assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance.”  They are a regulatory body in the truest sense, in that they don’t offer certification or approval of products, processes, etc.; they publish guidelines and standards for manufacturers and users to comply with.  OSHA Standard 1910.242(b), for instance, limits the downstream pressure of a compressed air operated device used for cleaning purposes to 30psi. Now, you can regulate the supply pressure to meet this, but that also limits the effectiveness of the air flow generated.  EXAIR Intelligent Compressed Air Products are all designed and manufactured to be in compliance with this standard, at any supply pressure.  Take, for example, our Super Air Nozzles:

Because none of our products can be dead-ended, there’s always a relief path preventing the downstream pressure from exceeding that level.

OSHA also has Standard 1910.95(a), that sets limits for maximum allowable noise exposure.  All EXAIR Intelligent Compressed Air Products, with the exception of some our largest and most power Super Air Nozzles (which aren’t normally used in areas that don’t already require hearing protection anyway) meet the 8-hour exposure limits of this standard.

Hearing loss is the best known, but not the only, ill effect of harmful noise exposure. It can also cause physical and psychological stress, impair concentration, and contribute to workplace accidents or injuries.

CE marking indicates conformity with health, safety, and environmental protection standards for products sold withing the European Economic Area.  Unlike OSHA standards, responsibility for CE marking falls solely with the seller of the product – a CE marked product has been tested and certified to have been made in such a way to meet safety & quality benchmarks specified for that type of product.  All EXAIR products that are defined under applicable directives have been tested according to these standards, and carry the CE mark.

The Restriction of Hazardous Substances Directive, or RoHS, is another standard borne from the European Union, and is geared towards public & workplace safety by restricting the use of hazardous materials in the manufacture of electronic & electrical equipment.  Since its inception in 2006, similar standards have been vigorously adopted around the globe.  Electrical portions of EXAIR’s Static Eliminators, EFC Electronic Flow Controls, ETC Electronic Temperature Controls, Digital Flowmeters, Solenoid Valves, and Thermostats all comply with the RoHS Directive.

Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act doesn’t address a concern for product users, but rather a particularly troubling human rights issue – Conflict Minerals.  For almost two decades, trade in tin, tantalum, tungsten and gold in the Democratic Republic of the Congo (DRC) has been used by some very bad people to finance violent campaigns against their neighbors.  EXAIR thoroughly and systematically documents our supply chain compliance with this act.  We are proudly committed to our support for this effort to the world a better place for everyone…especially those in desperate circumstances beyond their control.

EXAIR Intelligent Compressed Air Products have been successfully implemented into a variety of uses where application- or industry-specific standards are in force.  We’re happy to work with you to determine if our products meet those standards…or can be made to meet them.  If you’ve got such an application, give me a call.

Russ Bowman
Application Engineer
EXAIR Corporation
Visit us on the Web
Follow me on Twitter
Like us on Facebook

EXAIR Leads the Way with Standards and Certifications

For over 34 years, EXAIR has been the industry leader in providing Intelligent Compressed Air Products to the industrial marketplace. While much of our focus is to ensure our products are engineered to provide optimal performance, we are also dedicated to manufacturing products that meet a wide range of standards and directives to promote safety in relation to plant personnel.

 

For instance, all of our compressed air operated products meet or exceed OSHA Standards 29 CFR 1910.242(b), requiring that the outlet pressure of an open pipe, nozzle, air gun, etc., when used for cleaning purposes, must remain below 30 PSI when dead-ended against the skin, as well as Standard 29 CFR 1910.95(a) as a way to protect workers from job related injuries related to dangerous sound levels of 90 dBA and higher.

 

 


Many of our products are also CE Compliant, meeting the mandatory requirements for products intended to be sold in the European Economic Area or “EEA”. For example our Electronic Flow Control and Electronic Temperature Control (ETC) meet the EU (European Union) Low Voltage Directive 2006/95/EC.

 

 

EXAIR electrically powered devices, like our Static Eliminators and Digital Flowmeters for example, comply with the “Restriction of Hazardous Substances” or RoHS Directive 2011/65/EU, including the amendment outlined in the European Commission decision L 214/65.

 

 

We are also committed to providing material that supports the conflict mineral free rule to help aid in the relief of illegal trade of exotic materials, like tungsten, gold, tin and tantalum in the DRC region. Using the CMRT 4.20 template, we document our supply resources to ensure we provide conflict free products, as outlined in Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act.

 

Lastly, the European Union introduced the REACH program – Registration, Evaluation, Authorization and Restriction of Chemicals, as a method to register chemical substances being imported into the EU to protect people and the environment, per Regulation (EC) No 1907/2006 Title I, Article 3.  Also noted in the program, Title II, Article 7, they state that any product with a substance intended to be released under normal operating conditions, must be registered for quantities totaling more than 1 metric ton per year. Since EXAIR products do not intentionally release or contain any such substances, registration to meet the program is not required.

 

If you have any questions about any of these Standards or Directives or about which EXAIR products comply, please feel free to contact an application engineer for assistance. We’d be happy to help!

Justin Nicholl
Application Engineer
justinnicholl@exair.com
@EXAIR_JN

Safety, Compliance, And Certifications

News broke the other day about an accident at a manufacturing facility not far from us. Two workers’ arms were crushed when a machine malfunctioned. That’s the short story – there is, no doubt, going to be an intensive investigation where the details will be brought to light. For now, the lives of two people who showed up at work to do their jobs have been drastically and permanently changed, and that’s got me thinking (and writing) about safety, compliance, and certifications today.

EXAIR Corporation takes safety very seriously in every sense and every way:

*Design. All of our Intelligent Compressed Air Products are engineered to meet OSHA standards regarding dead end pressures and sound levels.

*Production, part I. We have exacting standards and procedures that govern the machining, manufacturing, assembly, and testing of every product that we make. Training, cross-training, and continuing training ensure that our products are the highest quality achievable.

*Production, part II. Speaking of training, our Production Manager conducts regular, all-hands safety training on a variety of topics. In every single training session, regardless of topic, he makes it clear that safety requires us all: from management’s responsibility for training, documentation and equipment, to operators’ attention to detail and compliance with procedures, to everyone’s diligence in watching out for, and reporting, anything that may not look right.

*Specification. Some of our products shouldn’t be used in certain applications:
-Our Static Eliminators use high voltage at a low amperage to ionize air. They can’t be used near flammable materials or gases.
Line Vacs create a high velocity, turbulent vacuum flow. Don’t use them with any material that can become an explosive mixture. Same goes for our Chip Vac, Heavy Duty Dry Vac, and Heavy Duty HEPA Vac.
-Speaking of Industrial Vacuums, our Reversible Drum Vacs and Chip Trappers operate by pulling a vacuum on the drum. They cannot be used with any material with a low flash point or with flammable liquids such as mineral spirits, gasoline or kerosene.

*Compliance. There are sanctioned regulatory bodies that define what makes…and keeps…products safe for use. EXAIR goes to all lengths necessary to ensure compliance and reporting with the ones pertinent to particular product lines, whether they’re CE marked, RoHS compliant, UL Listed/Recognized, etc. In fact, our products are also certified as Conflict Mineral-Free and REACH Compliant…for the safety of people involved in providing the materials that our products are made of.

CE cULlisted cULrecognized   ROHS_Vector    conflictfree

We go to every length possible to ensure that our products meet the standards that even the most demanding situations call for.

If you want to talk about safety and compliance, talk to us.

Russ Bowman
Application Engineer
Find us on the Web
Follow me on Twitter
Like us on Facebook