Tag: Efficiency Lab

EXAIR’s Heavy Duty Safety Air Gun’s: Powerful and Safe

Published on by Jordan T ShouseLeave a comment

EXAIR’s Heavy Duty Safety Air Gun is designed to provide powerful blasts of compressed air for use in rugged, industrial environments. With a larger 3/8 NPT air inlet compared to our other Safety Air Guns, it allows for higher force and flow values. It comes with a durable cast aluminum body and ergonomic composite rubber grip. The wide curved trigger allows for continuous use for hours without operators experiencing fatigue.

1350-6-CS – Heavy Duty Safety Air Gun with Model 1104 Air Nozzle, 6″ Alum. Ext Pipe & Chip Shield

All of EXAIR’s Safety Air Guns come with an engineered compressed air nozzle at the tip. This allows you to remain OSHA compliant while still getting the force you need to get the job done. EXAIR’s Super Air Nozzles utilize the coanda effect to entrain large amounts of ambient air from the environment. This ambient air mixes with the primary airstream and is projected towards the target with more force and flow than the supplied compressed air could deliver alone.

Compressed air goes in the back, as it exits the front ambient air is entrained in the total flow of air you are getting.

Each of the Safety Air Guns is available with extensions fully assembled ranging from 6”-72”. You can simply add a “-“ and the required length, in inches, to the end of any Safety Air Gun Model number.

Safety Air Gun Extensions

In addition, they’re also available with a Chip Shield to prevent any chips or debris from coming back toward your operators. Effective chip guarding is another component of OSHA 1910.242(b) in addition to the concerns of dead-end pressure. To add a Chip Shield onto the gun as well, a “-CS” to the standard Model number. For example, a Model 1310-12-CS would be a 1310 gun with 12” extension and a Chip Shield installed. If the application involves blowing off metal chips or shavings, your operators will certainly appreciate this Chip Shield preventing the debris from blowing back over them.

With EXAIR’s Heavy Duty Safety Air Gun, you can still achieve the high forces required for tough applications without the risk of injuries to personnel. Do yourselves and your operators a favor and get one on order today!

Jordan Shouse
Application Engineer

Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

One Safety Air Gun, Hundreds of Possibilities

Published on by Brian FarnoLeave a comment

In case you are new to the EXAIR blog, we talk a lot about the intelligent and safe use of compressed air. Most manufacturing facilities in the world have point-of-use compressed air and that will also equal to any that do, probably have a handheld blowgun in their facility which may or may not be safe and efficient. This may very quickly be one of the most common tools used throughout some facilities and is often the most overlooked when safety and efficiency are a concern.

The Soft Grip Safety Air Gun is a versatile safety air gun from EXAIR that can easily replace most of the loud and inefficient blowguns in a facility. The option to choose from 14 different engineered air nozzles, most of which are also available in multiple materials to fit the application just right, will give the ability to fit any operator’s requirement for force and flow. Couple that with the ability to add one of 8 different extension lengths or 6 different stay set hose lengths, and it will give the operators exactly what they need for those hard-to-reach areas while staying out of harm’s way. Lastly, the chip shield adds yet another layer of protection for the users and can be adjusted up and down on the extension to fit each application’s needs.

EXAIR’s Free Efficiency Lab

If you aren’t sure whether the handheld blowguns in your facility would meet or exceed OSHA standards for dead-end pressure and allowable noise level exposure, contact an Application Engineer today and send one to us for a FREE Efficiency Lab and find out which EXAIR Safety Air Gun is going to meet or exceed OSHA standards and your expectations.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

EXAIR Knowledge Base: A great and powerful tool

Published on by John BallLeave a comment

Knowledge is Power.  At EXAIR, we’re committed to providing our customers with the tools necessary to fix problems and train staff members with a selection of many different types of offerings.  We call this the “Knowledge Base”.  We have them segregated into different criteria to give you that “been there, done that” solutions.  There’s a ton of valuable information, and best of all, it’s all FREE!

Within our Knowledge Base, you’ll find case studies that highlight examples of applications where we’ve helped customers improve their processes, save money by reducing compressed air consumption, and improve worker safety. There’s a list of FAQs categorized by product line, a library of calculators to help estimate the savings you’ll experience, and a list of application examples.

In addition, we also have a library of previously recorded webinars that are free to view at your convenience.  We cover topics like inefficient vs. engineered nozzles, static generation, and finding and fixing leaks, to name a few.  In addition, we have videos that include product functions, informal videos, and tips and tricks for using our products.  We also include Application Assistance and an Efficiency Lab which will allow recommendations and performance comparisons. 

Don’t let these free resources go to waste.  You will have to sign in to EXAIR’s website, which is easy to do.  To find this wealth of information, just click on “Resources” in the top banner (as shown in the photo below).  It is a “one-stop” spot that gives available solutions with our Intelligent Compressed Air® Products.  

If you have pneumatic issues with blow-offs, cooling, cleaning, conveying, coating, or needing to conserve compressed air, we may have already solved this for you.  Don’t feel like we’re leaving you to figure everything out on your own. In addition to all the resources available to you within the Knowledge Base, EXAIR has a team of highly-trained Application Engineers with experience in a wide variety of industries and processes. There’s a good chance one of us has dealt with a similar application, and we’ll be happy to help point you in the right direction.

John Ball
International Application Engineer
Email: johnball@exair.com
Twitter: @EXAIR_jb

Photo: Question mark pile by qimono.  Pixabay license. 

Understand the ROI of Your EXAIR Products With Our FREE Efficiency Lab Service

Published on by Tyler DanielLeave a comment

Many facilities may not have the means to test the air consumption of their blowoff solutions. With compressed air being the most expensive utility in a manufacturing facility, it’s important to identify places where you can save money on your overall operating costs. EXAIR manufacturers a wide variety of products intended to help you reduce your compressed air usage. If you’re not able to accurately measure the consumption in your own shop, we invite you to send the products into EXAIR for testing.

All you have to do is contact an EXAIR Application Engineer and ship them straight to our warehouse in Cincinnati, Ohio. Once we receive it, our engineers will complete some in-depth testing to determine the compressed air consumption, sound level, and force that your current solution provides. With this information, we’ll be able to compare it to an EXAIR Engineered solution. This way we ensure that you receive the best, safest solution possible also capable of saving money through reduced air consumption and improved efficiency.  We’ll send you back a comprehensive report that’ll help you to make the best decision for your company.

This video below shows our EXAIR Efficiency Lab and some examples of the different types of products we’ve tested in the past:

This service is something that we offer to our customers completely free of charge. This way, you can rest assured that in going with a new solution from EXAIR, you’re getting the most bang for your buck. Oftentimes, it’s not known just how much some of these products cost to operate. It’s just compressed air, air is free right?? Compressed air is certainly not free, but in fact rather costly as a 4th utility in an industrial plant.

Making sure that you understand the products used within your various applications is even more critical in a time where everything in life is rapidly getting more expensive. By ensuring you’re using the best possible blowoff solutions for your processes, you can save a dramatic amount of energy that would otherwise be wasted.

If you think there’s anything in your facility that could be using too much air, we’re here to help. Reach out to an Application Engineer for more information on how we can help save you money!

Tyler Daniel, CCASS

Application Engineer
E-mail: TylerDaniel@EXAIR.com
Twitter: @EXAIR_TD