I recently worked with a customer at a company that manufactures steel sheets. They grind, polish, and then shot blast the steel sheets. As the material exits the shot blasting chamber, some of the media still sticks to the steel and is carrying over into additional processes. To mitigate this, they installed a 1” pipe with drilled holes at the exit of the conveyor to remove the excess media and keep it contained inside of the machine. While this worked, it was using a substantial amount of compressed air which was resulting in a pressure drop across the rest of the facility when this machine was in operation.
Although their current method was doing the job for them, they couldn’t live with the increased compressed air consumption. After searching the internet, they came across the EXAIR website and were interested in learning about other blowoff methods. Typically for an application involving a wide sheet of moving material we’d look towards one of our Super Air Knives, available from stock in lengths from 3”-108”. But, in this case there was some friction between the shot blasting media and the stainless steel sheet that required brute force. They needed something that was going to give them an increased amount of force, but still reduce their overall consumption.
I recommended our HP1125 High Power 2” Flat Nozzle. With a .025” thick shim installed, the HP1125 nozzle will produce 2.2 lbs of force when operated at 80 psig. This was more than enough to remove the shot blasting media. They’re also much quieter than an open blowoff, producing a sound level of just 83 dBA. While this wasn’t a motivating factor for them, the reduction in noise was definitely welcomed. They placed some on order and replaced the 1/4″ open holes with (10) Model HP1125 2” Flat Super Air Nozzles.
For comparison, (10) 1/4″ holes will consume 690 SCFM at 80 PSIG while (10) of the HP1125 comes in at just 370 SCFM. By simply installing the HP1125 (which conveniently also has a 1/4 NPT air inlet), they reduced their compressed air consumption by a whopping 46%!! By reducing air consumption they eliminated the system pressure drop, they were also able to increase the force as the compressor was able to maintain the 80 PSIG pressure at the header pipe. This also alleviated the pressure drops experienced elsewhere in the plant.
At EXAIR we have a wide-range of different products suited to a number of different blowoff applications. From 4mm nozzles producing just 2 ozs of force, all the way up to our largest nozzle capable of delivering 23 lbs of force and everything in between. No matter the application, EXAIR has something capable of taking care of the job. Odds are it’ll be safer, quieter, and more efficient!
Tyler Daniel
Application Engineer
E-mail: TylerDaniel@exair.com
Twitter: @EXAIR_TD
