From now through May 31, 2018, we are offering a FREE Vac-u-Gun with any order for one of our Industrial Housekeeping Vacuum Systems. The Vac-u-Gun is a multi-purpose tool that can be used to vacuum or transfer material from one location to another or it can be used as a powerful blow gun to clean debris off of the surface of a part or workstation. There is no electricity required to operate and no moving parts to wear out, providing for a safe, maintenance free operation.
When choosing one of our vacuums, selection can be simplified depending on what type of media you are needing to pickup. Our systems are going to be either solids handling or liquid handling.
Our Chip Vac Systems are the ideal choice when looking to vacuum dry or damp debris left over from machining operations and delivers them to a standard open top steel drum. For more abrasive material, such as sand or steel shot used in sandblasting processes, the Heavy Duty Dry Vac provides superior wear resistance due to it’s proprietary hardened alloy construction.
Our Chip Trapper and High Lift Chip Trapper are also used in liquid applications but these systems incorporate a filter bag inside the drum to capture any suspended solids in the liquid so only clean fluid is pumped back into the reservoir or tank.
In dusty applications we offer the Heavy Duty HEPA Vac which uses the same vacuum as the HD Dry Vac but this system provides a higher level of filtration meeting HEPA requirements of 99.97% filtration at the 0.3 micron level.
All of these products are In-Stock, Ready To Ship.
To take advantage of the offer, you need to order using the promotional Model number. Ordering is easy – you can email the order to email@example.com or place your order online at www.EXAIR.com. If you’d rather place your order over the phone or have any technical questions about our products, you can call us at 800-903-9247 and one of our reps will be happy to assist.
EXAIR will be giving away a free Soft Grip Safety Air Gun with the purchase of any EXAIR Super Air Knife from November 1st through December 31st, 2017. This special promotion will apply to all Super Air Knife orders, whether aluminum, stainless steel, or PVDF. Use the promotional model number during the promotional period and receive a free model 1210, a value of $81.00! The Soft Grip Safety Air Gun is a Top Pick, and provides the ideal combination of forceful flow, quiet noise level and low compressed air usage. To get the special promotional item, use the special part numbers as detailed in the link below.
The Super Air Knife is the latest generation of the EXAIR engineered air knives with dramatically reduced compressed air usage and noise compared to other types of blowoffs. The Super Air Knife is truly a more efficient tool for cleaning, drying or cooling parts, webs, or conveyors. The air flow is a uniform sheet of laminar air across the entire length with a hard-hitting force.
Replacing a noisy blowoff with a Super Air Knife results is a significant reduction in sound. Operation at a high pressure of 80 PSIG (5.5 Bar) leads to a sound level of just 69 dBA for most applications. Air amplification ratios (entrained air to compressed air) of 40:1 is produced. It also meets OSHA maximum dead-end pressure and noise requirements, for safe operation in the vicinity of plant personnel.
Typical applications for use include-
Post wash part drying
Sheet cleaning in strip mills
Part or component cooling
Web drying or cleaning
Environmental separation (air curtain)
Pre-paint blowoff and cleaning
Bag opening/filling operations
Scrap removal on converting operations
Take advantage of the Promotional Offering by clicking on the link at the top of the page. Qualified orders receive the free model 1210 Soft Grip Safety Air Guns as shown below.
If you have questions about Super Air Knives, Safety Air Guns, or would like to talk about any EXAIR Intelligent Compressed Air® Product, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.
The above title proved very true in a work experience of my father’s. After working in the mill for several years, he drew up a new piece of process equipment which would eventually turn in to something that they put in place on the production line. This was all done from his idea that he was able to place on a scrap piece of paper as a drawing. While he wasn’t the decision maker in the process, he was the person who saw what kind of impact this device could have and knew the people he had to get the information to.
That brings me to the topic of this blog, don’t ever think an idea is too small to warrant a reward. This can ring true throughout any type of application, including compressed air. There have been instances where a maintenance worker, or even a new operator, have called in to speak to me here asking what can they do to lower the noise in the work area when they are using the hand held blow gun the company supplies. After talking to them about what they are trying to achieve with the blow gun and how much air they are currently using, we generally find that they can save a good amount of compressed air, lower the noise level, and become OSHA compliant, all by changing this one simple tool. Once they have all the benefits that their company will see from implementing our engineered solution, they can then propose this to the decision makers.
For the most part, companies will at the very least entertain ideas like this. When you back that idea up with some relevant data on how much money the company will save, or the fact that is will make the work environment safer and more enjoyable, then you will more than likely get a little more attention. The main point is to ensure that you are getting that information to the correct person and that you have the correct information. That is one of the many reasons that EXAIR has a full team of Application Engineers who can help you identify how much air you might be using, what products will fit the need, and what kind of benefits your company will see. On top of all the information that we have available for free, we even offer the chance to get compensation for sharing application data with us.
That’s right, we will compensate you for sharing your cost savings, sound level reductions or application improvements, with us. This is all possible through our Case Study program. All you have to do to find out more is contact any Application Engineer. We simply need some photographs of the application and some quantitative data for the benefits you have gained. Don’t know what your current device is using, take advantage of our EXAIR Efficiency Lab, that will give us a good amount of information we need to then, help you solve a problem as well as produce a Case Study.
If you would like to discuss your compressed air systems or how we can help you, please contact us.