Recently, I had the pleasure of solving an application for a steel pipe manufacturer. To clean the inside diameters of their freshly-washed pipes, they were using open end blow offs: the ever-popular and easy-to-make, but loud and inefficient crushed-end tubing. I got excited, because this was my first chance to discuss our brand-new Back Blow Nozzle, which is aimed (pun intended) at cleaning inside diameter surfaces. That’s where my story develops a “bad news/good news/better news” pattern…
The bad news: The pipes that need cleaning are up to 20” in diameter…a little too large for our Model 1006SS ¼” NPT Back Blow Nozzle to be completely effective.
The good news: The user already had a system set up, using the aforementioned “homemade” blow offs, which looked something like this:
The better news: They were able to easily adapt their system to install our Model 1120 High Force Super Air Nozzles, which lowered their compressed air consumption as well as the noise level of the operation.
The moral to this story is, the solution may not be the first one that comes to mind. At EXAIR, that happens all the time. Line Vac questions turn into Air Amplifier answers, and vice versa. Cold Gun calls turn to discussions of Adjustable Spot Coolers. We’ve got three styles of Air Knives to choose from…they’re all perfectly suitable for a wide range of general industrial applications, but they each have their own particular advantages in certain situations. If you have a compressed air product application that you’d like to discuss, EXAIR is your best bet for the most efficient, quietest, quickest solution. It’s like I always say:
Find us on the Web
Follow me on Twitter
Like us on Facebook