Engineered Air Nozzles Reduce Noise Levels and Outlet Pressure, Meeting OSHA Requirements

“My operators are complaining that our air guns are too loud, how can you help me?” – is a very common inquiry we receive here at EXAIR on almost a daily basis. Many open end blowoffs or air guns fitted with nozzles that have cross drilled relief holes create high pitch wind shear, resulting in excessive noise levels, sometimes exceeding 100+ dBA. This not only is a safety concern but also an OSHA violation.

Variety of Air Nozzles that produce dangerously loud noise levels

Loud noises and the length of exposure time can lead to significant health concerns such as long term hearing loss, increased stress levels and potential injury due to lack of concentration. The Occupation Safety and Health Administration (OSHA) introduced Standard 29 CFR 1910.95(a) as a way to protect workers from job related injuries associated to potentially dangerous sound levels. Per the Standard, at 90 dBA an operator is limited to a maximum of 8 hours of constant exposure. As noise levels increase, the allowable exposure time decreases, in some cases slowing production, costing a company on their bottom line.

 

EXAIR’s Air Nozzles are engineered so they entrain surrounding air across the profile of the nozzle, which produces a smoother airflow, ultimately reducing wind shear, resulting in much lower sound levels, meeting the OSHA Standard.

Illustration showing the air travel of our Super Air Nozzles

 

In addition, our Air Nozzles also meet the OSHA Standard 1910.242(b) for 30 PSI dead end pressure. All of our engineered Air Nozzles provide a relief or a safe path for the air to exit if the nozzle were to be blocked or pressed against an operator’s body so the exiting air pressure will never reach 30 PSIG.

All of EXAIR’s Air Nozzles are available with standard NPT threads to easily adapt to existing air guns. We also off our full line of Safety Air Guns which are fitted with our engineered nozzles, providing an “off-the-shelf” OSHA compliant solution. For help selecting the best product to replace your existing device or if you have a new application you would like to discuss, give us a call at 800-903-9247.

Justin Nicholl
Application Engineer
justinicholl@exair.com
@EXAIR_JN

 

Chain-Chain-Change, Change Out That Drilled Pipe…

Life is full of change.  It might sound trite, but truer words were never spoken.  I used to get up around 6:30 on work days.  Now, thanks to my son’s middle school schedule, I’m usually seeing him out the door at that time.  Getting up earlier was certainly a difficult change at first, but it’s had its benefits.  Not the least of which is spending a little extra time with the boy in the morning.

One of our favorite things to do while eating breakfast is to watch the ‘How things are made’ types of shows. Of course, watching these types of shows with an engineer has its downside.  While we can usually explain exactly what’s happening in the process of whatever is being made, the problem is that we often do.  Meaning we wind up talking over the program, which, ironically, is one of my greatest pet peeves.  Speaking of change, guess that’s something I need to work on…

20141002_062454

At any rate, this morning we saw a show on making saltines.  At the sight of the copper pipe positioned near where the cracker dough comes off the die-cut wheel, I knew exactly what was up. ‘They’re using drilled pipe! That’s not safe and a HUGE waste of compressed air!  That’s the perfect application for a Super Air Knife!”  Guess watching these programs with an EXAIR engineer has an additional risk: We can get a little over-excited when we see OSHA violations and wastes of compressed air! I think I about made my son jump out of his gym shorts, but he’s watched these sorts of shows with me before.  He knew the risks…

Life is full of change, and while perhaps I can get better at not talking while the TV show is on, I doubt I’ll ever stop cringing at safety violations and wasting compressed air.  Do you have drilled pipe in your plant?  If so, you could be in violation of multiple safety standards and are definitely wasting money on compressed air.  EXAIR can help you minimize harmful noise levels and keep you in compliance with OSHA’s dead-end pressure standard. Please give EXAIR a call to begin saving air and increasing safety!

Dan Preston
Engineer-at-large
DanPreston@exair.com
1-800-903-9247

 

 

Promo’s: Everybody Loves Free Stuff

I have been wanting to purchase a pair of good quality headphones for a while now and with vacation coming next week, I figured now was a good time to make my purchase. I was pretty set on the manufacturer but the tough choice for me was going to be if I wanted a set of earbuds (that fit directly in the ear) or a more traditional pair of “over the ear” headphones. smiley_face_headphones_tshirt-d23545082320430684226v7p_325I tried about 4 different pairs of over the ear units to see what the quality of sound was versus the feel/comfort and was pleasantly surprised but was still leaning towards earbuds. Unfortunately, due to health/cleanliness issues, you aren’t allowed to try on earbuds – which makes sense. So if I was going to go the earbud route I wanted to make sure I had all my questions answered so I decided to get a salesperson to assist me.

We went over features/benefits but this only made me question myself more. Seeing that I was struggling with a decision, the salesperson decided to make my choice a little easier – he mentioned that his store, along with the manufacturer, were offering a free promo but only if I purchased a set of earbuds (at a certain price of course). Due to the sound quality and trusted manufacturer, I was leaning towards a set of earbuds anyway, but hey – who doesn’t love FREE stuff? What they were offering was a free carrying case (not really free since it was already in the box), a free 2 year service agreement ($37 value) and a $25 gift card to their store.

Of course, I took advantage of their offer and made the purchase. After listening to the earbuds while I finished my packing, I couldn’t be happier with my selection.

At EXAIR, we occasionally run promotional offers too. From now through September 30th, 2014, if you purchase one of our Precision Safety Air Guns, Soft Grip Safety Air Guns or our Heavy Duty Safety Air Guns (with or without an Aluminum extension), you will receive a FREE Chip Shield.

Free Chip Shield Promo
The polycarbonate Chip Shield, meeting OSHA 1910-242(b) for compressed air use, offers the operator safe and smart protection from flying debris as well as any splashing. Not to mention that all of our Safety Air Guns incorporate one of our Engineered Super Air Nozzles that meet or exceed the same OSHA standard and reduce air consumption and sound level.

This offer is good for all three models of our Safety Air Guns:

  • Durable, Lightweight, Precision Airflow – The Precision Safety Air Gun is a small ergonomic gun good for light duty cleaning or blowoff and fits well in smaller hands. It also has a strong focused blast of air capable of reaching into tight spaces.
  • Versatile, Industrial Duty, Most Popular – The Soft Grip Safety Air Gun is our most popular gun cast from aluminum with a comfortable four finger trigger to reduce fatigue over long periods. A large variety of air nozzle options provides a solution for light to heavy duty blowoff applications.
  • Powerful, Rugged, Robust – The Heavy Duty Safety Air Gun is the powerhouse you need for the harshest environments and stubborn blowoff applications. It is outfitted with many of our most powerful nozzles to provide the highest force upon your application.

To learn more about this offer, please visit our website www.EXAIR.com or if you have a specific application you would like to discuss, give us a call at 1-800-903-9247.

Justin Nicholl
Application Engineer
JustinNicholl@EXAIR.com
@EXAIR_JN