The video below is a brief introduction to the EXAIR Efficiency Lab, a free service provided by EXAIR for customers within the USA and Canada.
If you have a single point blowoff that does not have an engineered nozzle, or if you have a wider format blowoff, manifold or home-made drilled pipe, contact an Application Engineer with EXAIR and let us help you to reduce your energy waste. Following are some examples of product where we have helped to save some serious air and reduced noise levels which heightens employee comfort.
Non-engineered blowoffsDrilled and soldered copper pipe.Custom manufactured inefficient pipe blowoff
That’s right folks, we’ve gone and done it again. When a customer calls for custom product because their environment calls for it or due to dimensional requirements, EXAIR has the ability and flexibility to meet those needs!
This time around it was a customer with specific material requirements due to their environment. I had a customer contact me recently that was using an aluminum Super Air Knife near a high voltage operation and was getting ground interference due to the aluminum air knife. They asked if it was possible to make them a custom knife out of PEEK plastic. After some light discussions about the form of the knife and what other materials are safe for their environment we settled on a 30% glass filled PEEK plastic for the knife, brass bolts and pipe plugs, with a PTFE shim installed. The form factor of the knife would follow the same shape as our PVDF Super Air Knives that are available from stock. The customer could not use PVDF due to high temperature and potential off-gassing in the process.
The results are shown below.
EXAIR 6″ Super Air Knife in 30% Glass Filled PEEK Plastic w/ Brass Hardware and PTFE ShimEnd View – 6″ Super Air Knife in 30% Glass Filled PEEK Plastic w/ Brass Hardware & PTFE Shim
Whether you are looking for a one off product that is tailor made to your application or want to have a simple feature like hardware material changed in a stock EXAIR product that you are incorporating into thousands of machines, we have the solution for you.
A brief video showcasing the full EXAIR Swivel fittings offering. Each of the 9 Swivel Fitting models offers a 25° from center line adjustment for a total of 50° full range of adjustment. The Swivel fittings are an ideal accessory for a variety of EXAIR products. For more product details see our product page. For any questions or fitment suggestions contact an Application Engineer.
Just released, we are now stocking four different pipe sizes of Sanitary Flange 316 Stainless Steel Line Vacs. We are offering these in the following sizes, 1-1/2″, 2″, 2-1/2″, and 3″ Sanitary Flange. The performance is the same as our Stainless Steel Line Vacs, but now it is even easier to install in sanitary flanged piping systems. No need to get adapters or have specialty shops weld flanges on.
Model 161200-316 – 316 Stainless Steel Sanitary Flange Line Vac
The new Line Vacs are available for purchase on their own or in a kit which includes the Line Vac, a mounting bracket for the Line Vac, pressure regulator and filter separator. The only parts you provide are the clamps, gaskets and compressed air supply.
With a wide range of sizes and materials of construction, we’ve got your solution. Call us.
These are the latest four additions to our already extensive line of in-line pneumatic conveyors. If we do not offer a stock Line Vac that will fit your needs, we also offer custom Line Vacs to fit virtually any need you may have, just contact us and we will help you determine what will work!
