Tag: OSHA

OSHA Says Keep Compressed Air Use Safe and Quiet: EXAIR Does Just That

Published on by exaircorpLeave a comment

The Occupational Safety and Health Act was signed by Richard Nixon in 1970. Under the United Sates Department of Labor, shortly thereafter; OSHA, or the Occupational Safety and Health Administration was born. OSHA is a large regulatory agency tasked to assure safe and healthy working environments by setting and enforcing standards as well as to provide training, outreach and assistance. Although some people’s first response is to cringe at the word OSHA, they have been instrumental in dramatically reducing injury rates and injury costs without negative effects on employees or companies.

Sure we can all cringe by looking up OSHA horror stories on YouTube. And many of us have a story about that one company that was fined 10’s of thousands of dollars for x, y, or z violations… But in reality, OSHA are not the bad guys. They are not looking for fines, in fact they generally give warnings and timelines to fix possible issues, prior to an incident. The fines typically are generated when companies fail to comply. Yes, I know there are always exceptions, but exceptions are not the rule. We hear and hold on to the radical stories, and the day to day, mundane stories fall to the wayside. Regardless of how we feel, we all must comply.

When it comes to EXAIR products, there are two OSHA standards that we must adhere to. One is related to “sound” and one is related to “dead end pressure“.

First let’s look at the dead end pressure. OSHA Safety requirement 29 CFR 1910.242 (b) discusses the possibilities for air embolisms when more than 30 psi is “dead ended” into your skin. EXAIR products have pathways for air to exhaust so that they cannot be “dead ended”. Each product has a way for the air to exhaust to avoid danger. Here are a couple of examples:

Air nozzles have multiple paths to exhaust pressure
Air Knives exhaust the entire path, as well as out each end

Take note that when being used properly (no horseplay) the airflow will have some path to escape and cannot be blocked. They are designed so that air will escape prior to any danger.

Next we will take a look at OSHA requirement 29 CFR-1910.95 (a). This regulation deals with occupational noise exposure. Measuring sound in decibels (dBA) the magic number is 90. Anything under 90 dBA has no limitations on how long you can be exposed to it. For a reference 60 dBA is about the sound level of a normal conversation, or an air conditioner. 70 dBA is about the noise of a washing machine, 80-85 is like city traffic. Then we start getting loud like a motorcycle around 95, shouting or barking is about 110, and standing near a siren is about 120dBA.

Hearing loss is the best known, but not the only, ill effect of harmful noise exposure. It can also cause physical and psychological stress, impair concentration, and contribute to workplace accidents or injuries.

As mentioned, 90 dBA or less is our target to avoid needing alternative solutions such as noise barriers or PPE. Nearly all EXAIR products are compliant at or under 90 dBA. The few exceptions are with some of our high force / extensive reach products such as our High Force Air Nozzles.

Please reach out at anytime if you have any questions, or want to discuss EXAIR and OSHA compliance, or any EXAIR questions at all.

Thank you for stopping by,

Brian Wages

Application Engineer

EXAIR Corporation
Visit us on the Web
Follow me on Twitter

Sound Levels in Your Facility

Published on by Jordan T ShouseLeave a comment

One of the most common and dangerous hazards that occur within a manufacturing and production facility is the noise level within the plant. Noise is measured in units known as decibels. Decibels are a ratio of the power level of the sound compared to a logarithmic scale. If an employee is an exposed for too long to high levels of noise, they can begin to lose their hearing. That is where the OSHA 29 CFR 1910.95 regulation comes into play.

Hearing loss is the best known, but not the only, ill effect of harmful noise exposure. It can also cause physical and psychological stress, impair concentration, and contribute to workplace accidents or injuries.

This OSHA standard doesn’t just provide the protection against noise in the work place but monitoring as well. Companies shall provide at no cost audiometric tests for all employees to ensure that no damage is being to the hearing of all personnel. This program is to be repeated every six months and the results are to be made accessible to all personnel.                

Hearing is very important to our everyday lives and must be protected due to the fact that once it is damaged hearing loss cannot be lost be repaired. The OHSA 29 CFR 1910.95 is there to protect and monitor this dangerous hazard in the workplace so that all employees can go home safe and sound.

Here at EXAIR we design all of our products to safe and quite. Weather it is using one of our mufflers for vortex tubes or E-vac’s or one of our Super air nozzles we strive to meet and exceed the OSHA standard. One could also purchase EXAIR’s Digital Sound Level Meter which can give a accurate and responsive reading of how loud your compressed air sources are.

For more information on EXAIR’s Digital Sound Level Meter and any of EXAIR‘s Intelligent Compressed Air® Product lines, feel free to contact EXAIR and myself or any of our Application Engineers can help you determine the best solution.

Jordan Shouse
Application Engineer

Send me an Email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

About OSHA 29 CFR 1910.242(b) for Compressed Air Safety

Published on by Brian FarnoLeave a comment

In February of 1972 OSHA released a standard to improve worker safety when operating handheld compressed air devices being used for cleaning purposes. This directive focuses around human skins permeability. That is, if you were to take an open ended pipe that had compressed air being discharged over 30 psig it can actually push through the skin and create an air embolism.

OSHA’s Directive 29 CFR 1910.242(b)

Air Embolisms are extremely painful, and in extreme cases, can be deadly. The risk associated with an air embolism can be mitigated by following the OSHA directive and reducing the downstream pressure of an air nozzle or nozzle pressure below 30 psi for all static conditions. Dead ending is when the passageway for the air becomes blocked and turns a dynamic flow of air into a static flow. This is in the event the pipe, nozzle, lance, etc. becomes blocked by a human’s body. This is a directive that all Intelligent Compressed Air® products from EXAIR focus on meeting or exceeding.

Our Air Nozzles and Jets video shows a great depiction of how this can be achieved with our engineered design of nozzles. The recessed holes and the fact that there are multiple passages for the air to exit are easy to see on the nozzle. Products like the Super Air Knife may not be so easy to see but the way the air knife cap overlaps prevents the Super Air Knife from being dead ended in the event an operator comes into contact with the discharge air.

Even though this directive was created in 1972 it continues to be at the forefront of industrial environments. I have even been to a custom artwork facility that was effected by this standard because they would use a handheld blowgun to remove dust and debris before matting and framing artwork with glass. They also removed dirt and dust from the frames before paint. This wasn’t your typical manufacturing environment yet they were still held to the same standards and were made safe by implementing engineered solutions such as our Super Air Nozzle.

If you would like to discuss how we can help increase your operator safety and ensure you meet or exceed OSHA 29 CFR 1910.242(b), please contact an Application Engineer today.

Brian Farno
Application Engineer
BrianFarno@EXAIR.com
@EXAIR_BF

1 – OSHA Instruction STD 01-13-001 – Retrieved from: https://www.osha.gov/enforcement/directives/std-01-13-001

Application Database : Success Stories in Foundries

Published on by Jordan T ShouseLeave a comment

EXAIR products are used in countless applications across all facets of industry, we have been working to compile some in a easy to read Application Database on EXAIR.COM!

Today I wanted to cover a few application successes from within Foundries.

The first example is from a company who manufactures flux for aluminum processing. They were experiencing conveyor belt jam ups because not all the material would fall off at the tail end of the belt. What adhered to the belt would be carried over on the return, fell off due to gravity and vibration, and was causing build up underneath and jamming the belt. The Model 110036 36″ (914mm) Super Air Knife was installed on the end of the conveyor blowing off any tramp material as the belt came around the head pulley. This consolidated the debris to one area where they could easily reach it for removal. This all but eliminated maintenance and downtime.

Super Air Knife installed

A manufacturer of aluminum rods was having problems with removing drawing die lubricant from aluminum bar being cut to length. The lubricant was causing the bar to slip in the grippers, causing the bars to be cut short. Passing the bar through a Model 2402 2″ (51mm) Super Air Wipe effectively removed the lubricant, and eliminated grip slippage.

Super Air Wipe

The last customer operates an aluminum foundry. A small actuating cylinder’s seals were failing frequently, due to the heat from a nearby furnace. Using a Model 3230 Medium Vortex Tube, they are able to direct a flow of cold air onto the cylinder, keeping the elastomer seals cool, which greatly extends their life.

Cooling or Heating with the Vortex Tube

If you have questions about any of the quiet EXAIR Intelligent Compressed Air® Products, feel free to contact EXAIR and myself or one of our Application Engineers can help you determine the best solution.

Jordan Shouse
Application Engineer
Send me an email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS