Tag: adjustable air nozzle

Accessories to Get the Most Out of Your Safety Air Gun.

Published on by Jordan T ShouseLeave a comment

EXAIR Has a useful selection of Safety Air Guns. Including the VariBlast Precision,  Compact, Soft Grip, Heavy Duty and Super Blast Safety Air Guns, along with the newest addition, the TurboBlast. These blow guns are available with a variety of air nozzles, chip shields and pipe extensions. (Click on the product link above to see a blog about any of the eight types of Safety Air Guns) They are durable, comfortable and ergonomic to use. These Safety Air Guns are designed with durability and comfort in mind while also being ergonomically safe to use. Safe operation is assured along with low air consumption and noise levels. EXAIR Engineered air nozzles are available in Type 316 stainless steel for superior corrosion resistance and mechanical wear, Type 303 stainless steel for corrosion resistance, PEEK thermoplastic for non-marring and chemical resistance or zinc/aluminum alloy for general purpose applications.

Flying Debris? – Chip Shields are durable polycarbonate shields that protect the operator from the risk of flying debris often seen when blowing off chips from machined parts. They are also useful to prevent coolant from splashing back, creating a mess during drying processes.

The Chip Shields are available for EXAIR’s VariBlast, Soft Grip and Heavy Duty Safety Air Guns. The Chip Shield can be used on Safety Air Guns with or without an aluminum extension. They may be purchased as part of a new air gun system, or retrofitted as a Chip Shield Kit.  Consult an Application Engineer for selection assistance.

If you have a blow-off process where the air is to be directed at a distance away from the operator, or into a hard-to-reach location, an extension is the solution. Available in lengths from 6″ (152mm) to 72″ (1829mm), with sizes to meet most requirements can be found. To add an extension to an air gun, simply add -xx to the current part number. EXAIR’s Stay Set Hoses are available from 6”-36” in lengths with ¼ NPT male threads on each end, or a ¼ NPT male on one end and 1/8 NPT female on the other.

Model 1310-12 Heavy Duty Safety Air Gun, With 12″ Extension & 1100 Super Air Nozzle

The Stay Set Hoses are rigid and allow you to maintain precise positioning of the blow off nozzle. The hoses have “memory” and will not creep or bend.

Options from 6″ to 36″

 If you need a 12′ coiled air hose, to use with your Safety Air Gun, we have them available and in stock. Available with 1/8 NPT, 1/4 NPT or 3/8 NPT male end swivel connections. Avoid tangled and messy air lines and keep things neat!

If you have an application and need help deciding which EXAIR Safety Air Gun and/Nozzle you need. Please contact us and ask for an Application Engineer. We are always happy and eager to help.

Jordan Shouse
Application Engineer

Email me: email
Find us on the Web 
Like us on Facebook
Twitter: @EXAIR_JS

The EXAIR Heavy Duty Safety Air Gun

Published on by Al WooffittLeave a comment

A compressed air operated air gun is a commonly used tool in many industries. There are many options available through the many catalogs and industrial supply companies. Most inexpensive options will have triggers or other parts that will frequently wear out or break. They will also have performance similar to an open pipe, where they have an open hole that simply blows a lot of compressed air. This leads to high air consumption costs, as well as high noise levels; they can also be dangerous if the opening is dead-ended at high pressures.

EXAIR has several quiet and efficient Safety Air Guns, and with a large array of nozzles to choose from, we likely have the perfect solution for whatever your needs are. If you require more force for use in a rugged industrial environment, then our Heavy Duty Safety Air Gun may be the right option for you.

EXAIR Heavy Duty Safety Air Gun Benefits

Our Heavy Duty Safety Air Gun has a 3/8 NPT air inlet, which is larger than most other Safety Air Guns. This allows for higher force and flow values. It also comes with a durable cast aluminum body and ergonomic composite rubber grip. The wide curved trigger allows for continuous use for hours without operators experiencing fatigue.

As with all of EXAIR’s Safety Air Guns, the Heavy Duty Safety Air Gun takes advantage of our engineered Air Nozzles, ensuring that you remain OSHA compliant on both dead-end pressure and noise levels, while still delivering on force. We have several different length extensions, as well as chip shields, to customize the Heavy Duty Air Gun.

For any customers in the US or Canada, an order placed before September 30th, 2024 will receive a free Model 1126 1″ Flat Super Air Nozzle. If you would like to discuss how EXAIR’s Heavy Duty Air Gun, or any of our other Safety Air Guns can help in your application, feel free to give us a call.

Al Wooffitt
Application Engineer

Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW

What’s So Great About EXAIR Air Jets?

Published on by Russ BowmanLeave a comment

For over 40 years now, EXAIR has been making engineered Air Nozzles and Air Jets for a wide range of industrial and commercial applications. Basically, if you need to blow air onto, into, towards, or through something, we’ve got something for that.

Our Super Air Nozzles seem to “get all the press” (based on an unscientific survey of the EXAIR Blog), and maybe they should, with their ease of installation onto the end of a pipe or tube that someone who’s never thought about the cost of compressed air has been using as a cheap to make but expensive to operate blowoff.

Compression fittings and Model 1100 Super Air Nozzles transformed the part ejection from “loud and wasteful” to “quiet and efficient.”

Like our engineered Super Air Nozzles, our Air Jet products use the Coanda effect to entrain enormous amounts of free air from the surrounding environment. While the Super Air Nozzles do this via an array of small holes recessed between a series of fins, the Air Jet uses an internal annular ring nozzle to draw the free air through its throat. There are a number of applications where either a Super Air Nozzle or an Air Jet can be used efficiently, safely, and quietly. Some jobs, however, benefit from the specific design of one or the other. Since this is an Air Jets blog, I’m going to focus on them:

  • Powerful, directed air stream. This makes EXAIR Air Jets ideal for part ejection, chip removal, and part drying.
Model 6013 Brass High Velocity Air Jet (left) blows rinse water off beverage cans on a high speed conveyor. An array of Model 6013SS SS High Velocity Air Jets (right) dries a finned component after washing.
  • Reliable and efficient blowoff. With no moving parts, as long as you supply them with clean compressed air, they’ll operate darn near indefinitely, maintenance free. And they’ll use a LOT less of that compressed air than similarly sized open-ended blowoff devices too, thanks to engineering:
Compressed air enters through the 1/8 MNPT fitting and discharges into the throat via an annular ring gap, where the Coanda profile of the plug directs the air towards the jet outlet (1). This primary, high velocity flow pulls in air from the entrainment plenum (2), creating a total developed flow up to 25 times the compressed air flow (3).
  • Safe to use. EXAIR Air Jets, like the rest of our Intelligent Compressed Air Products, are compliant with OSHA Standard 1910.242(b) which limits the downstream pressure at the nozzle or opening of a compressed air device used for cleaning purposes to 30psi. If you cover the entire outlet opening, the air simply flows out the entrainment plenum.
  • Remote positioning. Since both the inlet and outlet can be ducted, you can fit a 1″ ID hose over the entrainment plenum and run the other end to the location where you want to draw airflow from. This is beneficial if, for example, you want to position the Air Jet in a contaminated area, but want to eliminate any of that contamination from the Air Jet’s developed airflow. You can also fit a 1/2″ ID hose over the outlet to direct the airflow elsewhere.
  • Adjustability. For the Adjustable Air Jet, it’s right there in the name: the Plug can be threaded into, or out of, the body to reduce, or increase the annular ring nozzle’s gap, and hence, the airflow and force applied. There’s a micrometer gap indicator so you can set – and reset – the performance to different levels, as required. The High Velocity Air Jet’s annular ring nozzle gap is fixed with a shim (they come with a 0.015″ thick shim installed) but Shim Sets, containing one each of a 0.006″ and 0.009″ thick shim, can be used to make gross adjustments to the airflow and force applied. You can regulate the air supply pressure to either the Adjustable or High Velocity Air Jets to very precisely “dial in” the performance.
A 0.006″ or 0.009″ thick shim from the 6313 Air Jet Shim Set (top left) can be installed in a High Velocity Air Jet (bottom left) to put the Air Jet in a whole new performance band. You can do this to an Adjustable Air Jet (right) by turning the knurled ring on the plug to set (and reset) the air gap and hence the performance.
  • Materials of construction. Both the Adjustable and High Velocity Air Jets come in brass for general purpose applications, or 303SS for use in areas with high heat or corrosive elements in the environment.
The brass Air Jets (top) are rated for installation in areas with ambient temperatures up to 275°F, while the 303SS models (bottom) are good to 400°F.

If you’d like to find out more about EXAIR Air Jets, or how any of our Intelligent Compressed Air Products can help you get the most out of your compressed air system, give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

5S + Constant Evolution = 6S

Published on by Brian FarnoLeave a comment
A sticker on my dad’s old lunch box. I still use the lunchbox today. He worked for a steel mill in maintenance for more than 35 years. This was from one of their many safety program pushes.

6S is a standard in many facilities. This standard spawns from the Lean Manufacturing and Six Sigma standards of 5S. Of course, it adds one more characteristic to it: the sixth S, Safety. Back in 2006, I achieved a Green Belt in Six Sigma and Safety was mentioned a good amount as a driver for several of the processes. The fact Safety was not one of the fives shows two things, I’m getting older and getting closer to that age where I have been out of school longer than I was in; and Safety is and should be a top priority, maybe it always should have been.

In case you have never been introduced to Lean Manufacturing or Six Sigma, this principle focuses on a single piece flow and optimizing a work process to minimize the amount of time it takes. This increases efficiency in the manufacturing process and ultimately puts money back into the bottom line of the business.

The first S is Sort, you should remove anything that is not needed for the production process, this could be additional tooling or resources that are not needed for the specific work station or task. This prevents any kind of clutter or confusion on what is needed.

The second S is Set In Order, just like the photo above, every tool and bin should have it’s place at the work station. This helps operators find what they need when they need it. The outlines also give a visual indicator to any tool or device that may be missing and or in use. Again, it helps with the operators time efficiency and reduces risk of leaving a tool in a process.

Third is SHINE, every aspect of a work area should be cleaned up, sometimes this needs to be done throughout the shift and other times just at the end of the shift to put everything back in place and prepare for the next operator or day. When I worked in retail I would hear managers tell people, “You have time to lean, you have time to clean.” and while it isn’t the best approach, it is a true statement. This does contribute to keeping production running at high efficiency, being able to spot leaks or wear issues on equipment that aren’t caked in chips, grease, and used fluids. It can also aid with safety by preventing slips or falls from a leak or debris building up from a process.

Fourth, Standardize, this means all work areas should look the same, maybe not the exact same tools, or process, but any operator should be able to walk into a work station, read the documentation, and be able to function sufficiently. This also helps to keep the old ways of tribal knowledge from happening which will prevent changes and adjustments from not being documented and will help to reduce learning curves when changes happen.

Fifth, Sustain, this is one of the hardest. This means the standards that have been set in place are kept. Repetition is key in a scenario where 5S or 6S are being implemented and even where they have been set in place for a while. Revisiting the standards and ensuring they are aligned to production and operator needs is always good.

A Safety Sticker from my dad’s 1988 lunchbox that I still use to this day. They were running safety programs before it was cool.

Sixth, Safety, this should always be at the forefront of any process. Being able to keep operators safe during a work day is always a high priority and one of the many ways to do that is to use the other five Ss to make sure that they can efficiently and safely work throughout their day.

Whether it is replacing open pipe blowoffs with engineered nozzles, cross drilled blowguns with Safety Air Guns, installing Line Vacs to help evacuate trim or debris, Super Air Amplifiers to cool down a part before it is being handled. I’ve even helped customers with custom length air hoses to ensure their operators can’t reach the air hose into a process too far in order to ensure operator safety. EXAIR is always focused on safety and ensuring our products help increase process efficiency. If you want to see how we can help you and your team, contact an Application Engineer today.

Brian Farno, MBA – CCASS
National Business Development Manager

BrianFarno@EXAIR.com
@EXAIR_BF