Tag: air powered vacuum

Utilizing EXAIR Accessories

Published on by jasonkirbyLeave a comment
Accessories

At EXAIR, we take great pride in our Intelligent Compressed Air Products, which are renowned for their efficiency and minimal maintenance requirements, thanks to their design featuring few or no moving parts. While we often highlight these advantages, we also do not want to overlook the importance of the accompanying accessories that enhance our products’ performance. These accessories play a crucial role in ensuring our compressed air solutions maintain their low maintenance and reduced noise levels, further solidifying their compliance with OSHA safety standards.

Compressed air filters and regulators are among the most essential accessories we offer, and we highly recommend their use with all our products, as well as with other brands. The Filter Separator effectively eliminates water, dirt, and rust from your compressed air system, while the 5-micron filter element prevents contaminants from clogging or damaging connected equipment. For more precise and additional filtration, an Oil Removal Filter should be installed downstream of the Filter Separator; it utilizes a 0.03-micron element to remove oil and solid particles. Our Pressure Regulators allow you to set the desired operating pressure, and we advise maintaining the minimum pressure necessary for optimal performance. This not only conserves air but also fine-tunes the efficiency of EXAIR products in various applications.

Good engineering practice calls for point of use filtration and moisture removal, such as that provided by EXAIR Filter Separators.
The Thermostat’s leads (left) are spliced into the Solenoid Valve’s ‘hot’ lead (bottom right), which essentially acts as the automatic temperature controlled ‘on/off’ switch for the Cabinet Cooler System. NEMA 4/4X versions include mounting hardware (top right).

We offer specialized accessories designed to enhance the performance of some of our products. For instance, our Line Vacs are complemented by the Line Vac Hose, while our Cabinet Coolers can be paired with Thermostats and Solenoid Valves. Additionally, we recommend Mufflers for optimal use with our Vortex Tubes. When it comes to our Air Knives, we provide several excellent options. The Universal Air Knife Mounting System offers a straightforward and dependable solution for mounting. For applications requiring longer knives or independent control of airflow sections, our Coupling Bracket Kits are ideal. Lastly, our Air Knife Plumbing Kits simplify the plumbing process for Air Knives exceeding 24 inches in length.

For those looking to connect Intelligent Compressed Air Products, we offer a range of compressed air hoses and fittings designed to enhance the convenience of installation. Coiled Hoses are an excellent match for our Safety Air Guns, providing greater mobility during operation. Additionally, our Compressed Air Hoses are frequently utilized with our Industrial Housekeeping products, ensuring that both the drum and dolly have the necessary reach for effective use.

Model 9256 6″ Stay Set Hose

If you are looking for an effective solution to mount or position your Air Nozzles, consider our Magnetic Bases, Stay Set Hoses, and Swivel Fittings, which can be combined to create a comprehensive setup.

If you have questions about our accessories, or anything regarding EXAIR and our products, please do not hesitate to reach out.

Jason Kirby
Application Engineer
Email: jasonkirby@exair.com
Twitter: @EXAIR_jk

EXAIR Industrial Housekeeping Product Line: A Complete Guide to Cleaner, Safer Facilities

Published on by Jordan T ShouseLeave a comment

Maintaining a clean, safe, and productive industrial environment is critical to operational efficiency. From managing metal chips on the shop floor to recovering liquids from pits and reservoirs, effective housekeeping directly impacts worker safety, equipment longevity, and overall plant performance.

EXAIR’s Industrial Housekeeping product line is engineered to meet these challenges using compressed air–powered solutions that are rugged, reliable, and designed specifically for industrial environments.

Industrial facilities generate a wide range of waste—dust, debris, metal chips, coolants, and liquids—that must be removed quickly and safely. Poor housekeeping can lead to:

  • Slip, trip, and fall hazards
  • Equipment damage or contamination
  • Reduced productivity
  • Increased maintenance costs
  • OSHA and safety compliance risks

Industrial Pneumatic Vacuums

At the core of the line are EXAIR’s air-powered vacuum systems, which use the Venturi principle to create strong suction with no motors or moving parts. This reduces maintenance while allowing safe use around liquids.

Key systems include:

  • EasySwitch® Wet-Dry Vac – Quickly converts between liquid and solid cleanup; ideal for coolant recovery and spills.
  • Chip Vac™ – Designed for machining environments to collect chips directly from mills and CNCs.
  • Heavy Duty Dry Vac™ – Handles abrasive materials like steel shot, sand, and sawdust.
  • Heavy Duty HEPA Vac™ – Provides 99.97% filtration for fine or hazardous dust.
  • High Lift Chip Trapper™ – Systems recover coolant while filtering out chips. They can lift liquids from pits or tanks, helping extend coolant life and reduce disposal costs.
  • Chip Trapper™ – Systems recover coolant while filtering out chips, helping extend coolant life and reduce disposal costs.
  • Reversible Drum Vac® – A two-way liquid transfer system that can fill or empty a 55-gallon drum in under two minutes using compressed air. Ideal for coolant pits, wastewater, spills, and liquid transfer without pumps or electricity.

EXAIR’s Industrial Housekeeping line delivers rugged, low-maintenance solutions for removing chips, dust, and liquids—helping facilities operate cleaner, safer, and more efficiently. They all deliver several key benefits: safer cleanup without electricity, minimal maintenance (no motors or impellers), fast debris and liquid removal, coolant recovery and cost savings, OSHA-compliant safety and noise levels.

If you think an EXAIR vacuum can help your facility but don’t know which one, give me a call. I’d be happy to help get the right solution pick out with you.

Jordan Shouse, CCASS

Application Engineer / Sales Operations Engineer

Send me an email
Find us on the Web 

Maximize Efficiency and Safety: Why Your Facility Needs an EXAIR Drum Vac

Published on by Neal RakerLeave a comment

In the demanding world of industrial maintenance, the “bucket and shovel” method or unreliable electric shop vacs simply don’t cut it. Whether you are managing floor spills, emptying coolant sumps, or recovering expensive fluids from deep pits, you need a solution that is as tough as your environment.

At EXAIR LLC, we’ve spent decades perfecting the Reversible Drum Vac™ (RDV) and High Lift Reversible Drum Vac™ to solve these exact headaches. Here is why our systems are the go-to choice for facility managers and maintenance teams worldwide.

1. Unmatched Reliability with No Moving Parts

Unlike electric vacuums that suffer from motor burnout or impeller clogs, our drum vacs are powered entirely by compressed air. This means:

  • Zero Maintenance: With no moving parts to wear out, these systems run nearly indefinitely.
  • Electrical Safety: Eliminating electricity removes the risk of shock in wet environments.
  • Quiet Operation: Our systems operate at significantly lower noise levels than traditional industrial vacuums.

2. Two-Way Action for Maximum Versatility

The “Reversible” in our name is a game-changer. With a simple turn of a knob, the same stainless-steel pump that filled your drum in under two minutes can reverse the airflow to empty it just as quickly.

  • Application Spotlight: Laboratory operators have used our Mini Reversible Drum Vac to pump waste from under-lab tanks and then easily discharge it into reclamation vessels.

3. Power When You Need It: The High Lift Advantage

For more “vertical” challenges, the High Lift Reversible Drum Vac provides the extra suction needed to move thick liquids (up to 1400 cPs) or lift fluids up to 15 feet.

  • Application Spotlight: A ferry operator uses the High Lift RDV to clean out engine room bilges, while a construction firm uses it to recover heavy slurry from concrete cutting—tasks that would kill a standard vacuum.

4. Built-In Safety & Speed

Our systems are engineered for industrial speed without sacrificing safety:

  • Auto-Shutoff: An internal float stops the vacuuming process once the drum is full, preventing messy overflows.
  • Rapid Filling: The High Lift model can fill a 55-gallon drum in just 85 seconds.

From cleaning up condiment spills in food processing to recovering hydraulic oil leaks in precast concrete plants, EXAIR drum vacs are the ultimate industrial housekeeping tool.

Ready to upgrade? You can explore our Model 6196 Reversible Drum Vac System for standard needs or the Model 6195 High Lift System for your most demanding pits and sumps.

Still Not Sure?

Feel free to connect with any of our Application Engineering Staff to answer your questions and address your concerns about giving one of these units a try. We are quite sure you will not be disappointed in our products’ performance.

Neal Raker, Application Engineering Manager
EXAIR LLC

Visit us on the Web
Follow me on Twitter
Like us on Facebook

Accessories for Your Compressed Air Products

Published on by Al WooffittLeave a comment

Here at EXAIR we are very proud of our Intelligent Compressed Air Products. We have spent a lot of time discussing their many benefits, including their efficiency, the fact that many have no moving parts, little to no maintenance, meeting or exceeding OSHA safety standards for noise or dead end pressure. One thing we don’t talk as much about is the accessories that go along with and complement our products. Several of these accessory items are the reason why our compressed air products can boast about having little to no maintenance, or reduced noise levels. In this blog I want to cover some of these unsung heroes.

From left to right, a few value-added accessories for your Vortex Tube: Hot Muffler, Cold Muffler, Automatic Drain Filter Separator, Oil Removal Filter, and Solenoid Valve/Thermostat Kit.

Some of the most popular accessories we offer are our compressed air Filters and Regulators. We suggest using these with all our products (or even with ones that aren’t ours).

The Filter Separator is designed to remove moisture, dirt, and rust from your compressed air system. The 5-micron filter element ensures that contaminants don’t clog or harm your compressed air equipment.

An Oil Removal Filter (which should always be installed after our Filter Separator) provides even more precise filtration by getting rid of oil and solid particles with a 0.03-micron element.

Our Pressure Regulators let you choose the operating pressure. At EXAIR, we always advise running at the lowest pressure necessary to complete the task. Pressure Regulators help you achieve that, reducing unnecessary air usage and fine-tuning the performance of EXAIR products for your specific application.

We have some accessories designed specifically for certain products. For our Line Vacs, there’s the Line Vac Hose. You can also find Thermostats and Solenoid Valves that work great with our Cabinet Coolers, and if you’re using Vortex Tubes, we suggest checking out our Mufflers.

When it comes to our Air Knives, we offer a variety of fantastic options:

If you’re looking for a simple and dependable way to mount your Air Knife, our Universal Air Knife Mounting System is just what you need.

If your project needs something longer than our stock Air Knives, or if you want to manage different sections of the air flow separately, our Coupling Bracket Kits are ideal.

And if you want to simplify the plumbing for your Air Knife, don’t miss our Air Knife Plumbing Kits. They’re suitable for all Air Knives that are longer than 24 inches.

If you’re looking for plumbing options, we’ve got a range of compressed air hoses and fittings that will simplify things for you.

Our Coiled Hoses work great with our Safety Air Guns, giving you more freedom of movement while you work.

Our Compressed Air Hoses are often used alongside our Industrial Housekeeping products to provide the necessary reach for the drum and dolly.

Finally, if you’re looking for a way to mount or position your Air Nozzles, check out our Magnetic Bases, Stay Set Hoses, and Swivel Fittings that can help create a complete setup.

No matter what your application requires or the product you need, we’ve got a variety of complementary accessory products that will simplify installation and adjustments. If you have any questions about these or any other EXAIR products, don’t hesitate to reach out to us.

Al Wooffitt
Application Engineer

Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW