Tag: Air Knife

It’s The Most Wonderful Time Of The Year…

Published on by Russ BowmanLeave a comment

One could make a good point about “The Most Wonderful Time Of The Year” being right now because…well, the song just says so, right? I can get on board with that, because I’m the world’s biggest sucker for Christmas music:

Of course, that song was used in one of my favorite ad campaigns of all time to describe a season that started a few months earlier:

But I’m going to have to go with “right now” not only for the Christmas music, but for my personal favorite EXAIR seasonal promotion:

Right now, through the end of the year, EXAIR will give you a Safety Air Gun with any Super Air Knife purchase. Not only do you get THE most efficient and quietest compressed air blowing product on the market today (we have data to back that up from a wide variety of products & devices that customers have sent in for Efficiency Lab testing), we’re going to sweeten the deal with free stuff.

First, let’s talk about the Super Air Knives:

  • They come in lengths from 3″ to 9ft. No matter how small, or big, your blowoff needs are, we’ve got you covered. If you need something longer than 9ft, they can be coupled together for a continuous, laminar airflow curtain as long as you need it to be.
Air Knife Coupling Bracket Kit
  • We make them in low cost, lightweight aluminum, tough & corrosion resistant Type 303 Stainless Steel, even tougher & more corrosion resistant Type 316 Stainless Steel, and PVDF (polyvinylidene fluoride) thermoplastic with Hastelloy hardware & PTFE shims for the highest level of corrosion resistance available.
PVDF Super Air Knife Kits include the Air Knife itself (PVDF body, Hastelloy C-276 hardware, and PTFE Shims,) a PTFE Shim Set, an Automatic Drain Filter Separator, and Pressure Regulator.
  • They’re efficient and quiet — for the same reason. See, the compressed air supply exits through a precise, narrow slot between the Cap & Body, which is precision finished, generating a 40:1 entrainment ratio. That means that for every SCFM of compressed air that the Super Air Knife uses, it entrains 40 SCFM of air from the surrounding environment…THAT’S efficiency. In doing so, that entrained air forms a low velocity boundary layer around the powerful, high velocity primary air stream. This layer serves to attenuate the sound level of that hard-hitting curtain of air, resulting in a sound level of only 69dBA.

And, if you order before 12/31/2025, we’ll throw in a FREE EXAIR Soft Grip Safety Air Gun, fitted with a Super Air Nozzle. If you’re using a loud, inefficient air gun for handheld blowoff, you really need to try one of these. They use the primary compressed air stream to entrain ‘free’ air from the surrounding environment as well, which generates a low velocity boundary layer for sound reduction too. The Super Air Nozzle is well suited for a wide range of industrial blowoff applications, and the Soft Grip Safety Air Gun is ideal for hours of continuous use without fatigue.

EXAIR Super Air Nozzles entrain an enormous amount of air from the surrounding environment, making them efficient, and quiet.

Need something right away? EXAIR has you covered there too: all of these (and pretty much any of our other Intelligent Compressed Air Products) are on the shelf and ready to ship, same day, with orders received by 2pm EST. If you’ve got a blowoff application that you’d like to find a safe, quiet, and efficient solution for, we can help…give me a call.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook

Get More Air Knife Options Than Anywhere Else: Sizes, Materials, and Shims

Published on by Tyler DanielLeave a comment

EXAIR Super Air Knives provide a reliable source of high velocity, laminar airflow for drying, cooling, and cleaning applications. By entraining ambient air at a rate of 40:1, they increase the total airflow while minimizing compressed air usage, making them an efficient and cost-effective solution for a wide range of industrial processes. With lengths from 3 inches to 108 inches, and multiple materials available, there is a Super Air Knife suitable for nearly any application.

EXAIR offers more material and size options from stock than any other manufacturer. Available materials include:

  • Aluminum, which is lightweight, durable, and cost-effective for general industrial use
  • Stainless steel, Type 303 or 316, for applications requiring resistance to corrosion, chemicals, or high temperatures
  • PVDF, for extremely corrosive environments where other metals degrade

Aluminum and stainless steel knives are available up to 108 inches in length, while PVDF is available up to 54 inches. This broad selection means most applications can be served directly from stock without waiting for a custom build. In fact, all stock knives ship the same day to US customers who place orders by 2:00 PM Eastern Time, allowing production lines to stay running with minimal downtime.

For applications that require precise airflow adjustment, EXAIR provides shim sets:

  • Stainless steel knives include three .002 inch shims
  • Aluminum knives include polyester shims of .001, .003, and .004 inch thicknesses.

These shims allow users to increase or decrease both force and flow without replacing the knife, providing flexibility for different product types, conveyor speeds, or cleaning requirements. This capability can improve efficiency, reduce compressed air usage, and ensure consistent results across multiple production lines.

Proper mounting is also critical to achieving optimal performance. All Super Air Knives include ¼-20 tapped holes along the bottom for mounting, and EXAIR offers a Universal Mounting System for precise positioning on conveyors or machine frames. The system includes rods, brackets, swivel clamps, and hardware for easy installation. Correct positioning ensures the laminar airflow makes full contact with the product, maximizing drying, cleaning, or cooling efficiency.

In cases where a stock knife is not suitable, EXAIR produces custom solutions. Special options include:

  • Custom lengths to fit precise application requirements
  • Modified air inlets or additional mounting holes for unique installation needs
  • Alternative materials for applications with unusual chemical or environmental challenges

Manufacturing is handled entirely in our Cincinnati, Ohio facility, giving EXAIR complete control over quality and the ability to quickly produce both stock and custom knives. This ensures that even specialized requirements can be delivered quickly and reliably.

Whether your application calls for a stock Super Air Knife or a custom solution, EXAIR offers the largest selection of sizes and materials, the flexibility to adjust airflow and force, and support from experienced Application Engineers. We can help you select the right material, length, shims, and mounting method to ensure your system operates efficiently and effectively, saving compressed air while improving results.

Tyler Daniel, CCASS

Application Engineer

E-mail: TylerDaniel@EXAIR.com

Accessories for Your Compressed Air Products

Published on by Al WooffittLeave a comment

Here at EXAIR we are very proud of our Intelligent Compressed Air Products. We have spent a lot of time discussing their many benefits, including their efficiency, the fact that many have no moving parts, little to no maintenance, meeting or exceeding OSHA safety standards for noise or dead end pressure. One thing we don’t talk as much about is the accessories that go along with and complement our products. Several of these accessory items are the reason why our compressed air products can boast about having little to no maintenance, or reduced noise levels. In this blog I want to cover some of these unsung heroes.

From left to right, a few value-added accessories for your Vortex Tube: Hot Muffler, Cold Muffler, Automatic Drain Filter Separator, Oil Removal Filter, and Solenoid Valve/Thermostat Kit.

Some of the most popular accessories we offer are our compressed air Filters and Regulators. We suggest using these with all our products (or even with ones that aren’t ours).

The Filter Separator is designed to remove moisture, dirt, and rust from your compressed air system. The 5-micron filter element ensures that contaminants don’t clog or harm your compressed air equipment.

An Oil Removal Filter (which should always be installed after our Filter Separator) provides even more precise filtration by getting rid of oil and solid particles with a 0.03-micron element.

Our Pressure Regulators let you choose the operating pressure. At EXAIR, we always advise running at the lowest pressure necessary to complete the task. Pressure Regulators help you achieve that, reducing unnecessary air usage and fine-tuning the performance of EXAIR products for your specific application.

We have some accessories designed specifically for certain products. For our Line Vacs, there’s the Line Vac Hose. You can also find Thermostats and Solenoid Valves that work great with our Cabinet Coolers, and if you’re using Vortex Tubes, we suggest checking out our Mufflers.

When it comes to our Air Knives, we offer a variety of fantastic options:

If you’re looking for a simple and dependable way to mount your Air Knife, our Universal Air Knife Mounting System is just what you need.

If your project needs something longer than our stock Air Knives, or if you want to manage different sections of the air flow separately, our Coupling Bracket Kits are ideal.

And if you want to simplify the plumbing for your Air Knife, don’t miss our Air Knife Plumbing Kits. They’re suitable for all Air Knives that are longer than 24 inches.

If you’re looking for plumbing options, we’ve got a range of compressed air hoses and fittings that will simplify things for you.

Our Coiled Hoses work great with our Safety Air Guns, giving you more freedom of movement while you work.

Our Compressed Air Hoses are often used alongside our Industrial Housekeeping products to provide the necessary reach for the drum and dolly.

Finally, if you’re looking for a way to mount or position your Air Nozzles, check out our Magnetic Bases, Stay Set Hoses, and Swivel Fittings that can help create a complete setup.

No matter what your application requires or the product you need, we’ve got a variety of complementary accessory products that will simplify installation and adjustments. If you have any questions about these or any other EXAIR products, don’t hesitate to reach out to us.

Al Wooffitt
Application Engineer

Send me an Email
Find us on the Web
Like us on Facebook
Twitter: @EXAIR_AW

What’s So Awful About A Drilled Pipe For A Conveyor Blowoff?

Published on by Russ BowmanLeave a comment

A technician from a company that performs comprehensive audits of compressed air systems called me with a sad, sad story. A client had just installed a brand-new state-of-the-art rotary scroll compressor with a variable speed drive…they were going all-out on efficiency, which is great. During the technician’s walk-through, however, he noticed a blowoff on a conveyor belt — they actually heard it before they could see it — a black iron pipe with a series of holes drilled along the length, plumbed with compressed air being supplied, unregulated, from a 100psig header.

The pipe was 18″ long and had 30 holes, 1/8″ diameter each, drilled along the length. From the table below, we can presume that this drilled pipe was consuming as much as 475.8 SCFM:

I say “as much as 475.8 SCFM” because the technician noted the holes were simply drilled through, they weren’t rounded, so I calculated the flow from a 1/8″ orifice at 100psig (26.0 CFM) with a 0.61 multiplier for sharp edges orifices. Also, the inlet pressure of the drilled pipe is not known. With a 1″ pipe supplying it, the flow could be limited to around 350 SCFM, due to line loss in the pipe.

The technician first asked about installing Air Nozzles in the drilled pipe. That’d mean drilling those holes out and tapping them individually. This COULD be done, and the drilled pipe could be fitted with 30 Model 1110-PEEK Nano Super Air Nozzles, with an air consumption of 8.3 SCFM @80psig each, for a total of 249 SCFM. That’s a significant reduction, but also a lot of work on the drilled pipe. I recommended replacing it entirely with a Super Air Knife.

A Model 110018 18″ Aluminum Super Air Knife consumes only 52.2 SCFM @80psig — almost an order of magnitude reduction! Let’s do the math on the costs:

First, the drilled pipe: Let’s give all the benefit of the doubt here and assume that the line loss had indeed limited the air consumption to 350 SCFM. Operating 8 hours a day, 5 days a week, 52 weeks a year, and using the US Department of Energy’s estimate that compressed air costs $0.25 per 1,000 Standard Cubic Feet used, the annual operating cost of the drilled pipe was $10,920.00:

350 SCFM X 60 min/hr X 8 hrs/day X 5 days/week X 52 weeks/year X $0.25/1,000 SCF = $10,920.00

Drilling & tapping those holes for EXAIR Nano Super Air Nozzles (8.3 SCFM ea X 30 = 249 SCFM total) would result in an annual operating cost of $7,768.80:

249 SCFM X 60 min/hr X 8 hrs/day X 5 days/week X 52 weeks/year X $0.25/1,000 SCF = $7,768.80

Replacing the drilled pipe with an EXAIR 18″ Super Air Knife (52.2 SCFM) drops the annual operating cost even further, to $1,628.64:

52.2 SCFM X 60 min/hr X 8 hrs/day X 5 days/week X 52 weeks/year X $0.25/1,000 SCF = $1,628.64

To put that further into perspective, the 2025 List Price for an 18″ Aluminum Super Air Knife is $533.00. It costs almost $9,300.00 per year LESS to operate than the drilled pipe. That means the Air Knife will have paid for itself in operating costs in just under 21 days.

To put that even FURTHER into perspective, the ~300 SCFM reduction in compressed air consumption is approximately 75HP worth of a typical industrial air compressor load. It’s not uncommon for a mid-to-large sized company to have more than one air compressor, and 50HP is a common size for a backup compressor. If that was the case in the facility that my technician caller was auditing, he’d be letting them know that this $533.00 investment that’s going to save them over $9,000.00 a year is ALSO going to allow them to shut down one of their air compressors. Completely.

So, THAT’S what’s so awful about a drilled pipe. If you have any in your facility, we should talk.

Russ Bowman, CCASS

Application Engineer
Visit us on the Web
Follow me on Twitter
Like us on Facebook